TNEB AE Basic Engineering Science Previous Year Questions with detailed Solutions: TNEB ஆல் நடத்தப்படும் உதவி பொறியாளர் தேர்விற்கான முந்தைய ஆண்டு கேள்விகள், விரிவான விளக்கத்துடன் இந்த கட்டுரையில் வழங்கப்பட்டுள்ளது. TNEB AE அடிப்படை பொறியியல் அறிவியல் முந்தைய ஆண்டு கேள்விகள், AE தேர்வுக்கு விண்ணப்பித்து அதற்கு தயாராகும் அனைத்து விண்ணப்பதாரர்களுக்கும் பயனளிக்கும் முறையில் இக்கட்டுரையானது வடிவமைக்கப்பட்டுள்ளது. TANGEDCO AE தேர்வு முறை பொறியியல் கணிதம், அடிப்படை பொறியியல் மற்றும் அறிவியல் மற்றும் சம்பந்தப்பட்ட ஒழுக்கம் போன்ற மூன்று பகுதிகளை உள்ளடக்கியது.
Fill the Form and Get All The Latest Job Alerts
Q1. ஒரு உருக்குலைய தக்க உடலம் அதனுடைய வலிமை வரம்புக்கு உட்பட்டு உருக்குலைவுக்கு உள்ளாவது
1. அது உடையும் வரை
2. நெகிழும் தன்மையோடு விரிவாகும் வரை
3. செலுத்தப்பட்ட விசைகள் மற்றும் திருப்புமுனைகள் நிலைம விசைகள் மற்றும் நிலைம உந்தங்களோடு சமநிலை அடையும் வரை
4. நெளியும் வரை
Q2. அதிகபட்ச முதன்மை உரழ்திருப்புமை என்பது
1. அதிகபட்ச விசையை எதிர்க்கக்கூடிய ஒரு பரப்பின் நிலை
2. அதிகபட்ச திருப்புவிசையை எதிர்க்கக் கூடிய ஒரு பரப்பின் நிலை
3. அதிகபட்ச வளை திருப்புமையை எதிர்க்கக் கூடிய ஒரு பரப்பின் நிலை
4. அதிகபட்ச நறுக்கினை எதிர்க்கக்கூடிய ஒரு பரப்பின் நிலை
Q3. வேக-நேர வரைபடத்தின் கீழுள்ள பரப்பு, பின்வரும் எதை குறிக்கிறது?
1. துகளின் திசைவேகம்
2. துகளின் முடுக்கம்
3. துகள் கடந்த தூரம்
4. துகளின் உந்தம்
Q4. மேல்நோக்கி செங்குத்தாக எறியப்பட்ட ஒரு கல்லின் பறக்கும் நேரம் என்பது
1. அதன் நிறைக்கு எதிர் விகிதத்தில் இருக்கும்
2. அதன் நிறைக்கு நேர்விகிதத்தில் இருக்கும்
3. அதன் தொடக்கநிலை திசை வேகத்திற்கு எதிர் விகிதத்தில் இருக்கும்
4. அதன் தொடக்க நிலை திசைவேகத்தை நேர்விகிதத்தில் இருக்கும்
Q5. ஒரு ரயில் 600 மீட்டர் நீளமுள்ள பாலத்தை கடக்கிறது. அந்த ரயிலின் வேகம் மணிக்கு 30 மீ. ஆகவும், அது அந்தப் பாலத்தை 20 வினாடிகளில் கடக்கிறது எனில், அந்த ரயிலின் நீளம் என்ன?
1. 900 மீ
2. 600 மீ
3. 150 மீ
4. 300 மீ
Q6. அமுக்க குறியீடு ‘n’ எவ்வாறு இருக்கும் போது, ஒரு மூடிய அமைப்பின் அமுக்கத்திற்கு தேவைப்படும் வேலையின் மதிப்பு அதிகரிக்கும்?
1. அதிகரிக்கும் போது
2. குறையும் போது
3. மாறாமல் இருக்கும் போது
4. முதலில் அதிகரித்து பின்பு குறையும் போது
Q7. பொது வாயு மாதிரியானது, வாயுவின் மூலக்கூறு எடை மற்றும் பின்வரும் எதன் உடனான பெருக்க தொகைக்கு சமம் என வரையறுக்கப்படுகிறது?
1. மாறாத அழுத்தத்தில் சுய வெப்பம்
2. மாறாத பருமனில் சுய வெப்பம்
3. இரு சுய வெப்பங்களின் விகிதம்
4. வாயு மாறிலி
Q8. ஒரு உருளையில் உள்ள வாயு நகரக்கூடிய உந்து தண்டினால், அதன் உண்மையான பருமனில் இருந்து பாதியாக அமுக்கப்படுகிறது. இந்த செயல்பாட்டில், 300 kJ வெப்பம், வாயுவிலிருந்து விலகுகிறது. மேலும் அக ஆற்றல் மாறாமல் உள்ளது. வாயு மீது செய்யப்படும் வேலையானது N-m இல் எவ்வளவு?
1.300
2. 300000
3. 30
4. 3000
Q9. கிளாசியஸ் இன் கூற்றுப்படி பின்வரும் எது சரியானதாகும்?
1. ஒரு சுற்றில் இயங்கும் அதிக வெப்பநிலையில் உள்ள ஒரு உடலத்திலிருந்து கொடுக்கப்படும் வெப்பத்தை பெற்று, அதற்கு இணையான வேலையை செய்யக் கூடிய ஒரு வெப்ப பொறியை கட்டமைக்க இயலாது.
2. ஒரு சுற்றில் இயங்கும் குளிர்ந்த உடலத்திலிருந்து சூடாக உள்ள ஒரு உடலத்திற்கு வெப்பத்தை பரிமாற்றுவதை அல்லாமல் வேறு எந்த விளைவையும் உண்டாக்காத ஒரு கருவியை கட்டமைக்க இயலாது.
3. இருவேறுபட்ட உலோகங்களை ஒரு முனையில் சூடாக்கியும், மறுமுனையில் குளிர்விக்கவும் செய்யும்போது உருவாகும் மின்காந்த புலம் ஆனது, இரு முனைகளுக்கு இடையே உள்ள வெப்பநிலை வேறுபாட்டிற்கு நேர்விகிதத்தில் இருக்கும்.
4. வெப்பத்தை வேலையாக மாற்ற இயலும்.
Q10. 320 Hz மற்றும் 240 Hz அதிர்வெண்களை கொண்ட ஓசைகள் இடையேயான இசை சார்ந்த இடைவெளி, என்னவாக இருக்கும்?
1. 80
2. 4/3
3. 560
4. 320*240
[sso_enhancement_lead_form_manual title=”ADDA247 TAMIL வாராந்திர தமிழ்நாடு மாநில GK Q&A-PDF ஐ இங்கே பதிவிறக்கம் செய்யலாம் PART-20″ button=”Download Now” pdf=”/jobs/wp-content/uploads/2021/10/25161209/Formatted-TAMILNADU-STATE-GK-PART-20.pdf”]
Q11. இரண்டு அலைகள் ஒருங்களானவை எனப்படும் போது, அவை
1. ஒரே வீச்சு கொண்டவை.
2. ஒரே வீச்சு மற்றும் ஒரே அலை நீளம் கொண்டவை.
3. ஒரே அலை நீளம் கொண்டவை.
4. ஒரே அலைநீளம் மற்றும் நிலையான கட்ட மாறுபாடு கொண்டவை.
Q12. பின்வருவனவற்றுள் எந்த கதிர்கள் அதிக அதிர்வெண்ணை உடையது?
1. புற ஊதாக் கதிர்கள்
2. நுண் அலைகள்
3. அகச்சிவப்பு கதிர்கள்
4. X கதிர்கள்
Q13. டேவிசன் மற்றும் ஜெர்மன் சோதனையில், எலக்ட்ரான்களுக்கு 54 V கொடுக்கப்படும் போது அறியப்படும் தீர்மானமான சிதறல் திசை
1. 90°
2. 27°
3. 108°
4. 50°
Q14. ஏந்தியோடு குறிகைகளை கலக்கும் செயல், இவ்வாறு அழைக்கப்படுகிறது.
1. பிரிகை
2. குறிப்பேற்றம்
3. மெலிதல்
4. குறிப்பிறக்கம்
Q15. கழுத்து உருவாக்கம் (Necking) எந்த வகையான முறிவில் ஏற்படுகிறது?
1. நீளுதல்
2. நொறுங்குதல்
3. அயர்வு
4. ஊர்வு
READ MORE: Alkaline Earth Metals
Q16. மாறுநிலை காந்தப்புலத்திற்கு மேலே, மீக்கடத்தி என்னவாக மாற்றம் அடைகிறது?
1. ஒரு குறைகடத்தியாக
2. ஒரு மின்கடத்தாப் பொருளாக
3. ஒரு சாதாரண பொருளாக
4. ஒரு காந்த தன்மையுள்ள பொருளாக
Q17. அணு உலையில், வெங்களிகள் என்னவாக பயன்படுத்தப்படுகின்றன?
1. குளிர்விப்பானாக
2. எரிபொருளாக
3. தடுப்பானாக
4. தணிப்பானாக
Q18. பாய்மம் எனப்படும் பொருளானது
1. கொள்கலனை நிரப்புவது
2. பூஜ்ஜிய பாகியலை உடையது
3. அமுக்க முடியாதது
4. நறுக்கும் செயல்பாட்டின் கீழ் பாய்வது
Q19. நீர்மநிலை பாய்மத்தின் ஒரு புள்ளிக்கான மோர் வட்டம் என்பது
1. அதன் தொடக்க ங்களை தொடாத ஒரு வட்டம்
2. அதன் தொடக்கங்களை தொடும் ஒரு வட்டம்
3. சாதாரண தகைவு அச்சின் மீது உள்ள புள்ளி
4. நறுக்கு தகைவு அச்சின் மீது உள்ள ஒரு புள்ளி
Q20. எல்லை படல பிரிவு உண்டாக காரணம் என்ன?
1. அழுத்தம் குறைவதால் ஏற்படும் உட்குடைமம்.
2. பாதகமான அழுத்த சரிவு
3. பூஜ்ஜிய அழுத்த சரிவு
4. சாதகமான அழுத்த சரிவு
[sso_enhancement_lead_form_manual title=”வாராந்திர நடப்பு நிகழ்வுகள் October 2nd Week 2021″ button=”Download Now” pdf=”/jobs/wp-content/uploads/2021/10/18150252/Weekly-Current-Affairs-PDF-in-Tamil-2nd-Week-of-October-2021.pdf”]
Q21. ஒரு வினைச்சூழலியின் வழியாக, 10 மீ நிகர மட்டின் கீழ், 30 m^3/s வெளிப்போக்கு செலுத்தப்படுகிறது. ஒட்டுமொத்த வினைத்திறன் 0.866 எனில், உருவாக்கப்படும் மின்னாற்றல் kW இல் எவ்வளவு?
1. 3400
2. 3450
3. 2940
4. 2500
Q22. பின்வரும் எது அழுகிய முட்டை நாற்றம் மற்றும் சுவை பிரச்சனையையும் விளைவிக்கும்?
1. க்ளோரின்
2. பென்சீன்
3. நைட்ரேட்
4. ஹைட்ரஜன் சல்பைடு
Q23. ஒரு 1mA மின்னோட்ட அளவி 100 Ω மின்தடையை கொண்டுள்ளது. இந்த மின்னோட்ட அளவி 1A அளவாக மாற்றப்பட வேண்டும் எனில், தேவைப்படும் இணைய மின் தடையின் அளவு என்னவாக இருக்கும்?
1. 0.001 Ω
2. 0.1001 Ω
3. 1000000 Ω
4. 100 Ω
Q24. பிந்து சுமைகளில், ஒரு மாறு மின்னாக்கியின் ஆர்மெச்சுர் எதிர்வினை எவ்வாறு இருக்கும்?
1. குறுக்கு காந்தமாக்கல்
2. காந்தமகற்றல்
3. எந்த விளைவும் ஏற்படுத்தாது
4. காந்தமாக்கல்
Q25. ஒரு 145 V நேர்மின்னோட்ட கம்பி வலைக்கு, தனியாக தூண்டப்பட்ட நேர்மின்னோட்ட மின்னாக்கியானது 150A ஐ வழங்குகிறது. மின்னாக்கியின் வேகம் 800 RPM ஆகும். ஆர்மெச்சுர் மின்தடை 0.1 Ω ஆகும். மின்னாக்கியின் வேகம் 1000RPM ஆக உயர்த்தப்படும் போது, நேர்மின்னோட்ட கம்பி வலைக்கு வழங்கப்பட்ட மின்னோட்ட மதிப்பானது என்ன?
1. 550 A
2. 600 A
3. 700 A
4. 800 A
READ MORE: Scientific facts to know
Q26. ஒரு மின்மாற்றியின் உள்ளகம், தட்டடுக்கு செய்யப்படுவது எதற்காக?
1. அதன் கட்டமைப்பை எளிதாக்க
2. எட்டி மின்னோட்ட இழப்பை குறைக்க
3. செலவைக் குறைக்க
4. காந்த தயக்க இழப்பை குறைக்க
Q27. ஒத்தியங்கு மோட்டாரின் புலம், கிளர்வு நிலையில் உள்ளது எனில், திறன் காரணி என்னவாகும்?
1. பிந்தும்
2. முந்தும்
3. ஒன்று
4. ஒன்றை விட அதிகம்
Q28. பின்வரும் எது, C நிரல் மொழியில், ஒரும செயலியாகும்?
1. !
2. Size of
3. ~
4. &&
Q29. C நிரல் மொழியில், ஒரு சுட்டி மாறியில் சேகரிக்கப்பட்ட முகவரியில் உள்ள மதிப்பினை பெற பயன்படும் செயலி எது?
1. &
2. ||
3. &&
4. *
Q30. PtH2/H2SO4 அரை மின்கலத்தின் pH மதிப்பு (ஆக்ஸிஜனேற்ற மின் முனை அழுத்தம் 0.3V ஆக உள்ளது) என்னவாகும்?
1. 4.08
2. 5.08
3. 5.18
4. 5.28
[sso_enhancement_lead_form_manual title=”ADDA247 TAMIL வாராந்திர தமிழ்நாடு மாநில GK Q&A-PDF ஐ இங்கே பதிவிறக்கம் செய்யலாம் PART-19″ button=”Download Now” pdf=”/jobs/wp-content/uploads/2021/10/18092333/Formatted-TAMILNADU-STATE-GK-PART-19.pdf”]
Practice These QUIZZES (வினா விடை) and Increase Your Success Rate In The TNEB Exams.
SOLUTIONS
S1. Ans. (3)
S2. Ans. (3)
Principal Axes and Principal Moment of Inertia:
where Ix, Iy is the moment of inertia about the x-axis and y-axis respectively and Ixy is the product of inertia about the x-and y-axis
∵ I1 > I2, it represents the position of an area along which it can resist a maximum bending moment.
S3. Ans. (3)
The area under the speed-time graph gives the distance travelled.
S4. Ans. (4)
The range of the projectile,
R = u cos θ * t
Whereas the time of flight is the total time for which projectile stayed in the air.
Time of flight for the projectile,
t = 2 u sin θ / g
The angle of projection = θ
Initial velocity = u
Gravitational acceleration = g
Time of flight = t
Range of projectile = R
Explanation:
From the above explanation, we can see that
Time of flight, t is directly proportional to its initial velocity
i.e., t = 2 u sin θ / g ⇒ t α u
Hence option 4 is correct among all.
S5. Ans. (4)
Let the length of the train be D metres and speed of the train be S m/s
Given,
S = 30 m/s
As the train passes a long bridge of length 600 m in 20 seconds
S= (D+600) / 30 — (1)
30*30 = D+600
D = 300 m
Note: If the train has passed a pole or man (negligible length) then its length would not have been included in equation 1)
S6. Ans. (1)
W α (CC or n)
Thus, compressibility index will increase, if the requirement for compression increases.
S7. Ans. (4)
S8. Ans. (2)
When heat energy is supplied to a gas, two things may occur:
According to the first law of Thermodynamics:
δQ = δW + ΔU
Where δQ is change in heat, δW is work done, and ΔU is internal energy change.
CALCULATION:
Given that:
Heat given to system,δQ = +300 kJ
Change in internal energy change, ΔU = 0 kJ
From the First law of thermodynamics
δQ = δW + ΔU
δQ = δW + 0 = 300 kJ = 300 x 1000 J = 300,000 J
And from the work energy relation, we know that 1 J = 1 Nm
Thus the work done on the gas in N-m will be 300000 Nm
S9. Ans.(2)
Clausius statement: It is impossible to construct a system which will operate in a cycle, transfers heat from the low-temperature reservoir (or object) to the high-temperature reservoir (or object) without any external effect or work interaction with the surrounding.
Refrigeration is based on Clausius statement of the second law of thermodynamics.
S10. Ans. (2)
1) A musical interval is defined as the ratio of two frequencies.
2) This means that successive increments of pitch by the same interval result in an exponential increase of frequency, even though the human ear perceives this as a linear increase in pitch.
3) For this reason, intervals are often measured in cents, a unit derived from the logarithm of the frequency ratio.
Calculation:
Given,
Higher frequency fH = 320 Hz
Lower frequency fL = 240 Hz
Musical interval between two frequencies is given by:
fH / fL = 320 / 240
= 4/3
S11. Ans. (4)
Coherent sources: If the sources which have zero or constant phase difference have the same frequency or we can say wavelength, then the two sources are considered to be coherent. The coherence of two waves defines how well two waves are correlated with each other.
S12. Ans. (4)
S13. Ans. (4)
S14. Ans. (2)
Dispersion: Dispersion, in wave motion, is any phenomenon associated with the propagation of individual waves at speeds that depend on their wavelengths. Dispersion is sometimes called the separation of light into colors, an effect called angular dispersion
Attenuation: Attenuation is the loss of signal strength in networking cables or connections. This typically is measured in decibels (dB) or voltage and can occur due to a variety of factors.
Demodulation: Demodulation is the process of extracting the original information-bearing signal (message signal) from a carrier wave. It is the inverse of the modulation process.
S15. Ans. (1)
S16. Ans. (3)
S17. Ans. (2)
S18. Ans. (d)
S19. Ans. (3)
Properties of Mohr Circle:
S20. Ans .(2)
S21. Ans. (4)
Given that:
Discharge (Q) = 30 m3/s
Density of water (ρ) = 1000 kg/m3
Net head (h) = 10 m
Acceleration due to gravity (g) = 9.8 m/s2
Input power (Pi) = ρ g Q h = 1000 × 9.8 × 30 × 10 = 2940000 W
Efficiency, η = Po / Pi
0.866 = Po / 2940000
So output power or power developed (Po) = 0.866 × 2940000 = 2546040 = around 2500 kW
S22. Ans. (4)
S23. Ans. (2)
Given that,
Full scale deflection current (Im) = 1 mA
Meter resistance (Rm) = 100 Ω
Required full-scale reading (I) = 1 A
Note:
To increase the ranges of ammeter, we need to connect a small shunt resistance in parallel with ammeters.
To increase the ranges of a voltmeter, we need to connect a high series of multiplier resistance in series with voltmeters.
S24. Ans. (2)
S25. Ans. (1)
By KVL,
E1 = Vt + Ia Ra
E1 = 145 + 150 × 0.1 = 160 V
In separately excited machine ϕ = constant
E ∝ N
N is the generator speed.
= 550 A
S26. Ans. (2)
Eddy current loss in the transformer is given by:
Pe = Ke Bm2. t2. f2. V Watts
Where;
K – coefficient of eddy current. Its value depends upon the nature of magnetic material
Bm – Maximum value of flux density in Wb/m2
t – Thickness of lamination in meters
f – Frequency of reversal of the magnetic field in Hz
V – Volume of magnetic material in m3
From the above formula, we conclude that the Eddy current loss is proportional to the square of the frequency.
Since the Eddy current loss is proportional to the square of the thickness of the lamination.
∴ The eddy current loss in a transformer can be reduced by decreasing the thickness of the laminations.
S27. Ans. (1)
S28. Ans. (4)
The unary operators operate on a single operand
Example:
Unary Operator | Example | Output |
! | int a=0; printf(“%d”,!a); | 1 |
Sizeof | sizeof(char) | 1 (in byte) |
~ | printf(“%d”,~3); | -4 |
From the table it is clear that !, sizeof(),~ operates on a single operator Hence the unary operator
The binary operator operates on two operands; Example: logical AND(&&), logical OR(||) etc
S29. Ans. (4)
Pointers:
Operators in pointers:
S30. Ans. (2)
Given:
Eoxidation = 0.3 V
pH = Eoxidation / 0.06 = 0.3 / 0.06
= 5.08
போட்டித் தேர்வுகளுக்கு தயாராகும் மாணவர்களுக்கு பயன்படும் வகையில் உருவாக்கப்பட்டுள்ளது. இக்கட்டுரை TNEB AE க்கு தயாராகும் மாணவர்களுக்கு பயன்படும் வகையில் கொடுக்கப்பட்டுள்ளது.
வெற்றி பெற வாழ்த்துக்கள் !!!
*இப்போது உங்கள் வீட்டில் தமிழில் நேரடி வகுப்புகள் கிடைக்கின்றன*
*பயிற்சி மட்டுமே தேர்வுர உங்களுக்கு உதவ முடியும் | Adda247 தமிழ் மூலம் உங்கள் பயிற்சியை இப்போது தொடங்கவும்*
Adda247App | Adda247 Tamil Youtube
Adda247 Tamil telegram group –Tnpsc sure shot selection group
இந்தக் கட்டுரையில், TNPSC குரூப் 1, குரூப் 2, குரூப் 2A, குரூப் 4 மாநிலப் போட்டித் தேர்வுகளான TNUSRB,…
இந்தக் கட்டுரையில், TNPSC குரூப் 1, குரூப் 2, குரூப் 2A, குரூப் 4 மாநிலப் போட்டித் தேர்வுகளான TNUSRB,…
இந்தக் கட்டுரையில், TNPSC குரூப் 1, குரூப் 2, குரூப் 2A, குரூப் 4 மாநிலப் போட்டித் தேர்வுகளான TNUSRB,…
சென்னை உயர்நீதிமன்ற மாதிரி வினாத்தாள்: நீங்கள் சென்னை உயர் நீதிமன்றத் தேர்வுக்குத் தயாரானால், இந்தக் கட்டுரை உங்களுக்கானது. தேர்வாளர், ரீடர்…
சென்னை உயர்நீதிமன்ற பாடத்திட்டம் 2024: சென்னை உயர்நீதிமன்ற பாடத்திட்டம் 2024, சென்னை உயர்நீதிமன்றம் தேர்வாளர், ரீடர் சீனியர் மாநகர், ஜூனியர்…
இந்திய அரசு அமைப்பின் முக்கியமான கேள்விகள் மற்றும் பதில்களைக் கீழே பார்க்கவும். அனைத்து போட்டித் தேர்வுகளிலும் இந்திய அரசு அமைப்பு…