The Manipur Public Service Commission (MPSC) has released the provisional answer key for the Assistant Engineer/Manager (Civil and Electrical) exam. The written exam was held on 12 November 2026, and Provisional the answer keys came out on 13 November 2026.
Candidates can now download the PDFs and check their answers. If you find a wrong answer, you can raise an objection online from 16 to 20 November 2026 by paying Rs. 300 per question. Read on for the download links, dates, fee and steps.
Manipur PSC Assistant Engineer Answer Key 2026 Out
MPSC has issued an official notification dated 13 November 2026 for the provisional answer keys. The keys cover the General Ability Test, Civil Engineering Paper-I and II, and Electrical Engineering Paper-I and II. In total, six PDFs have been uploaded. The notification also explains how candidates can raise objections against the answers. You can find it in the “Answer Key” or “What’s New” section of mpscmanipur.gov.in. Below is the attached official notice for the Manipur PSC Assistant Engineer Answer Key.
This is a MPSC provisional answer key, so it can change after objections are reviewed. The commission will announce the final answer key later. Here are the key details in one place.
Particulars
Details
Conducting Authority
Manipur Public Service Commission (MPSC)
Post Name
Assistant Engineer/Manager (Civil and Electrical)
Total Vacancies
130
Recruitment Reference
No. 7/1/2026-MPSC (DR)
Answer Key Type
Provisional
Answer Key Status
Released
Answer Key Release Date
13 November 2026
Objective Exam Date
12 November 2026
Objection Dates
16 to 20 November 2026 (till 5:00 PM)
Objection Fee
Rs. 300 per question
Official Website
mpscmanipur.gov.in
Important Dates
MPSC advertised these posts on 3 February 2026. The objective exam was held on 12 November, and the conventional (descriptive) exam on 13 November 2026. The objection window is five days long, so candidates should act early. The final answer key and result dates are not announced yet.
The MPSC answer keys are given paper by paper for both Civil and Electrical Engineering. Choose the correct paper and match your question booklet series before checking answers. Using the wrong series will give a wrong score.
How to Download Manipur PSC Assistant Engineer Answer Key 2026
Downloading the MPSC answer key is simple and takes only a few minutes. Make sure you pick the right discipline and paper. Save the PDF so you can use it while raising objections.
Visit the official website mpscmanipur.gov.in.
Open the “Answer Key” or “What’s New” section.
Find the Assistant Engineer/Manager (Civil/Electrical) answer key notification dated 13 November 2026.
Choose Civil Engineering or Electrical Engineering.
Open the General Ability Test, Paper-I or Paper-II key.
Download the PDF and save it.
Find your question booklet series and compare your answers.
Who Can Raise Objections?
The table below shows who can raise objections against Manipur PSC Assistant Engineer Answer Key:
Condition
Details
Who can object
Only candidates who appeared in the written exam
Login details needed
Application Number and Date of Birth
Proof required
Textbook or authentic source (book name, page number)
Document format
PDF only
Fee
Rs. 300 per question
Payment mode
Online only
Manipur PSC Assistant Engineer Answer Key Objection Portal Link
Candidates can submit objections only through the official MPSC online portal. The portal is open from 16 November 2026 and closes at 5:00 PM on 20 November 2026. Objections sent through any other method will not be accepted. Keep your Application Number and Date of Birth ready.
How to Raise Objections Against Manipur PSC Assistant Engineer Answer Key 2026
Raise an objection only if you are sure an answer is wrong and you have proof. Weak objections may be rejected, and the fee is charged per question. Follow these steps to raise objection against Manipur PSC Assistant Professor Answer Key:
Visit the objection portal at empsconline.gov.in.
Log in with your Application Number and Date of Birth.
Open the question you want to challenge.
Read the question and the provisional answer shown.
Select the answer you think is correct.
Write your reason with the book title and page number.
Upload supporting documents in PDF format.
Pay Rs. 300 per question online.
Complete the final submission before 5:00 PM on 20 November 2026.
Q1. Is the Manipur PSC AE Answer Key 2026 out?
Yes, MPSC released the provisional answer key for Assistant Engineer/Manager (Civil and Electrical) on 13 November 2026. Candidates can download it from mpscmanipur.gov.in.
Q2. Where can I download the MPSC Assistant Engineer Civil and Electrical answer key PDF?
Visit mpscmanipur.gov.in and open the “Answer Key” or “What’s New” section. Choose Civil or Electrical Engineering, then download the PDF for your paper.
Q3. How many answer key PDFs has MPSC released for the AE exam?
MPSC has released six PDFs. These cover the General Ability Test, Paper-I and Paper-II for both Civil and Electrical Engineering.
Q4. What is the last date to challenge the MPSC AE answer key 2026?
The objection window opens on 16 November 2026. The last date is 20 November 2026, up to 5:00 PM.
Q5. What is the objection fee for the Manipur PSC AE answer key?
The fee is Rs. 300 per question. It must be paid online through the official objection portal.
Q6. How do I raise an objection against the MPSC Assistant Engineer answer key?
Log in at empsconline.gov.in with your Application Number and Date of Birth. Select the question and the answer you think is correct. Add the book name and page number as proof, upload the PDF documents and pay the fee.
Q7. Is the MPSC AE provisional answer key the final key?
No. The provisional key may change after MPSC reviews the objections. The final answer key date has not been announced yet.
The Uttar Pradesh Subordinate Services Selection Commission (UPSSSC) has released two notifications for UPSSSC JE Recruitment 2026 across mechanical & electrical disciplines for Junior Engineer & other technical posts. A total of 1,536 vacancies have been announced, including 1,156 Mechanical vacancies under Advertisement No. 24-Exam/2026 and 380 Electrical vacancies under Advertisement No. 25-Exam/2026 on 12 November 2026.
The online application process for Mechanical & Electrical posts started on 3 November & 6 November 2026, respectively. Candidates can apply for Mechanical vacancies until 25 November and Electrical vacancies until 27 November 2026. Candidates must have appeared in UPSSSC PET-2025, hold a valid PET scorecard, and meet the prescribed post-wise educational qualifications.
UPSSSC JE Recruitment 2026: Latest Update
UPSSSC has announced 1,536 vacancies through two separate recruitment advertisements for Mechanical and Electrical posts.
The Mechanical recruitment includes 1,156 vacancies under Advertisement No. 24-Exam/2026.
The Electrical recruitment includes 380 vacancies under Advertisement No. 25-Exam/2026.
The Mechanical application process started on 3 November 2026, and the last date to apply is 25 November 2026.
The Electrical application process started on 6 November 2026, and the last date to apply is 27 November 2026.
Candidates must have appeared in PET-2025 and possess a valid scorecard.
The application processing fee is ₹25 for all categories.
The fee reconciliation and application correction deadlines are 2 December for Mechanical and 4 December for Electrical.
The UPSSSC JE Main Examination date has not been announced yet.
UPSSSC JE Notification 2026 PDF
UPSSSC has issued official notifications for Mechanical and Electrical recruitment. Candidates should download the relevant UPSSSC JE Notification 2026 PDF and check the post-wise vacancies, educational qualifications, age limit, application instructions, and examination details before applying. Candidates can download the official notification PDF through the direct link given below.
Notification
Official PDF
UPSSSC JE Mechanical Notification 2026 (Advt. 24-Exam/2026)
The mechanical application window is available from 3 to 25 November, while the electrical application window is from 6 to 27 November 2026.
Event
Mechanical
Electrical
Notification Date
12 October 2026
12 October 2026
Online Application Starts
3 November 2026
6 November 2026
Last Date to Apply
25 November 2026
27 November 2026
Fee Reconciliation and Correction Deadline
2 December 2026
4 December 2026
Admit card
To be announced
To be announced
Written Examination
To be announced
To be announced
UPSSSC JE Vacancy 2026
The Commission has announced 1,156 vacancies for Mechanical posts and 380 vacancies for Electrical posts across multiple departments. Candidates can check the detailed UPSSSC JE Vacancy 2026 in the table below.
UPSSSC JE Stream-Wise Vacancy 2026
Stream
UR
SC
ST
OBC
EWS
Total
Mechanical
439
319
15
285
98
1,156
Electrical
177
78
7
85
33
380
Total
616
397
22
370
131
1,536
UPSSSC JE Mechanical Vacancy 2026
UPSSSC has released a total of 1156 mechanical vacancies across many government departments. Candidates can check the detailed category-wise UPSSSC JE Mechanical vacancies in the table below.
Department
Post Name
UR
SC
ST
OBC
EWS
Total
Ground Water Department, UP
Technical Assistant (Mechanical) – Special Selection
–
2
0
1
–
3
Prison Administration and Reform Services, UP
Instructor Machine
1
0
0
0
0
1
UPSRTC, Lucknow
Assistant Storekeeper
52
27
2
35
12
128
UPSRTC, Lucknow
Mechanic
119
52
6
66
27
270
Irrigation and Water Resources Directorate
Junior Engineer (Mechanical)
126
64
2
82
30
304
Irrigation and Water Resources Directorate
Junior Engineer (Mechanical) – Special Selection
–
113
0
41
–
154
Panchayati Raj Directorate
Assistant District Panchayat Raj Officer (Technical)
14
6
1
8
3
32
Public Works Department (PWD)
Junior Engineer (Mechanical)
127
55
4
52
26
264
Total
439
319
15
285
98
1,156
UPSSSC JE Electrical Vacancy 2026
UPSSSC has released a total of 380 electrical vacancies across many government departments. Candidates can check the detailed category-wise UPSSSC JE Electrical Vacancy in the table below.
Department
Post Name
UR
SC
ST
OBC
EWS
Total
Ground Water Department, UP
Technical Assistant (Electrical) – Special Selection
–
1
0
0
–
1
Electrical Safety Directorate
Junior Engineer (Electrical)
6
3
0
4
1
14
Electrical Safety Directorate
Junior Engineer (Electrical) – Special Selection
–
12
1
7
–
20
Deen Dayal Upadhyay Gorakhpur University
Junior Engineer (Electrical)
1
0
0
0
0
1
Research Development and Training Institute, Kanpur
Research Assistant (Shodh Sahayak)
1
0
0
0
0
1
Dr. Ram Manohar Lohiya National Law University, Lucknow
Junior Engineer (Electrical)
1
0
0
0
0
1
Prof. Rajendra Singh (Rajju Bhaiya) University, Prayagraj
Junior Engineer (Electrical)
1
0
0
0
0
1
UP State Construction and Infrastructure Development Corporation Ltd.
Junior Engineer (Electrical)
2
1
0
1
0
4
UPSRTC, Lucknow
Electrician (Vidyutkar)
23
12
1
15
5
56
Guru Jambheshwar University, Moradabad
Junior Engineer (Electrical)
1
0
0
0
0
1
Maa Pateshwari University, Balrampur
Junior Engineer (Electrical)
1
0
0
0
0
1
Maa Vindhyavasini University, Mirzapur
Junior Engineer (Electrical)
1
0
0
0
0
1
UP Rajkiya Nirman Nigam Ltd.
Junior Engineer (Electrical)
18
10
1
11
4
44
UP Rajkiya Nirman Nigam Ltd.
Junior Engineer (Electrical) – Special Selection
0
1
0
1
–
2
Public Works Department (PWD)
Junior Engineer (Electrical)
120
38
4
46
23
231
Maa Shakumbhari University, Saharanpur
Junior Engineer (Electrical)
1
0
0
0
0
1
Total
177
78
7
85
33
380
UPSSSC JE Recruitment 2026: Mechanical vs Electrical
Particulars
Mechanical Recruitment
Electrical Recruitment
Advertisement Number
24-Exam/2026
25-Exam/2026
Total Vacancies
1,156
380
Application Start Date
3 November 2026
6 November 2026
Last Date to Apply
25 November 2026
27 November 2026
Fee Reconciliation and Correction Deadline
2 December 2026
4 December 2026
Who Is Eligible for UPSSSC JE 2026?
Candidates applying for the UPSSSC JE Vacancy must meet three conditions: a valid PET-2025 score, the post-wise educational qualification, and the age limit as on 1 July 2026.
PET-2025 Requirement
Only candidates who appeared in UPSSSC PET-2025 and received a scorecard can apply.
Candidates with a zero or negative PET-2025 score will not be shortlisted.
PET-2025 registration details (registration number, linked mobile/email) are used to log in to the application.
UPSSSC JE Educational Qualification 2026
Candidates must possess a diploma or other prescribed qualification in Mechanical or Electrical Engineering. The exact educational qualification varies by post, which candidates can check in the table below.
UPSSSC JE Educational Qualification for Mechanical Posts
Post / Department
Essential Qualification
Junior Engineer (Mechanical), PWD
High School (UP Board or equivalent) with a 3-year Diploma in Mechanical Engineering from BTEUP or equivalent
Junior Engineer (Mechanical), Irrigation
Diploma in Mechanical Engineering from a recognised institution/university or BTEUP, or National Certificate in Mechanical Engineering (AICTE)
ADPRO (Technical), Panchayati Raj
Diploma in Mechanical Engineering from a recognised institution
Technical Assistant (Mechanical), Ground Water
3-year Diploma in Mechanical Engineering from BTEUP or a Government-recognised equivalent
Instructor Machine, Prison Administration
Intermediate (UP Board or equivalent) + 3-year Diploma in Mechanical Maintenance
Mechanic, UPSRTC
3-year Diploma in Automobile or Mechanical (Automobile) Engineering; Heavy Vehicle Driving License is a preferential qualification
Assistant Storekeeper, UPSRTC
Diploma in Automobile or Mechanical Engineering from a recognised polytechnic
UPSSSC JE Educational Qualification for Electrical Posts
Post / Department
Essential Qualification
Junior Engineer (Electrical), PWD and State Universities
High School (UP Board or equivalent) with a 3-year Diploma in Electrical Engineering from BTEUP or equivalent
The age limit is calculated as of 1 July 2026. The minimum age depends on the post.
Posts
Minimum Age
Maximum Age
Technical Assistant (Mechanical/Electrical), Ground Water Department
21 years
40 years
ADPRO (Technical), Panchayati Raj
21 years
40 years
Research Assistant, RDTI Kanpur
21 years
40 years
JE (Electrical), UP State Construction & Infrastructure Development Corp.
21 years
40 years
All other posts (JE, Mechanic, Electrician, Assistant Storekeeper, Instructor Machine)
18 years
40 years
Age relaxation: Eligible candidates from SC, ST, OBC, PwBD, ex-servicemen and other categories can get age relaxation as per UP Government rules. These benefits are available only to Uttar Pradesh residents; candidates from other states are treated as General category candidates.
UPSSSC JE PET-2025 Shortlisting Rules
Candidates applying for UPSSSC JE Recruitment 2026 must meet the PET-2025 eligibility and shortlisting conditions specified in the relevant advertisement. A valid PET-2025 scorecard is an important requirement, but it does not guarantee selection for the main examination or final appointment. UPSSSC will shortlist candidates for the Main Examination based on their normalised PET-2025 scores and merit. Therefore, candidates should check their PET scorecard and ensure the details are correct before applying.
Important Note: Candidates with a zero or negative absolute or normalised PET-2025 score will not be shortlisted for the Main Examination.
UPSSSC JE Apply Online 2026 Link
The UPSSSC JE Apply Online 2026 process is being conducted for 1,536 Junior Engineer and other technical vacancies through two separate recruitment advertisements. Candidates can apply for both 1,156 Mechanical posts & 380 Electrical posts from 3 November to 25 November 2026 & 6 November 2026 to 27 November 2026, respectively. Eligible candidates can submit their application forms through the official website, upsssc.gov.in, within the prescribed deadlines. Candidates are advised to complete the registration and application process before the last date to avoid last-minute technical issues.
UPSSSC JE Application Fee 2026
The application fee structure is the same for all categories under both advertisements.
Category
Application Fee
Processing Fee
Total
General/Unreserved
₹0
₹25
₹25
OBC
₹0
₹25
₹25
SC
₹0
₹25
₹25
ST
₹0
₹25
₹25
Payment Mode: Online only (Debit Card, Credit Card, Net Banking or UPI)
What Is the Fee Reconciliation Process?
Sometimes, a candidate completes the payment, but the application status does not update immediately. In such cases, candidates should log in to the UPSSSC Applicant’s Dashboard and follow the fee-reconciliation instructions, such as Update Your Transaction ID by Double Verification, to check and update the payment transaction.
After completing the required steps, candidates should verify that their payment has been reconciled and that the final application form is available. They should download and save a copy of the submitted form for future reference.
Fee Reconciliation and Application Correction
After paying the application fee, candidates must check on the UPSSSC portal that their payment is reconciled, meaning it has been matched to their application. After the portal confirms successful submission, download and save your final application form and keep the payment receipt. Candidates can check the last date of application correction & fee submission in the table below.
Branch
Application Deadline
Last Date for Fee Reconciliation & Correction
JE Mechanical
25 November 2026
2 December 2026
JE Electrical
27 November 2026
4 December 2026
How to Apply Online for UPSSSC JE Recruitment 2026?
Candidates can follow these steps to submit their applications once the relevant application window opens.
Visit the official website at upsssc.gov.in.
Open the live advertisements section.
Select Advertisement No. 24-Exam/2026 for Mechanical posts or Advertisement No. 25-Exam/2026 for Electrical posts.
Log in using the PET-2025 registration details and complete the required verification.
Check the personal information displayed on the portal.
Select the post or posts for which you meet the eligibility requirements.
Enter the required educational qualification details, including the institution, passing year, marks, and certificate information.
Provide details of any preferential qualifications, where applicable.
Read the declaration carefully and verify all the information entered.
Pay the ₹25 processing fee through the available payment options.
Submit the application and download or print the confirmation for future reference.
NOTE: Candidates should check every detail carefully before submitting the form. They should also make sure that the qualification and category details match their supporting documents.
Common Mistakes to Avoid While Applying for Junior Engineer Posts
Candidates should avoid the following mistakes given below while applying for the UPSSSC JE Recruitment 2026:
Selecting the wrong advertisement number.
Assuming that every vacancy requires the same qualification.
Applying without meeting the PET-2025 requirement.
Entering incorrect educational or category details.
Waiting until the last day to pay the processing fee.
Ignoring the fee-reconciliation deadline.
Assuming the application is complete without checking the submission status.
Confusing the application processing fee with any separate main examination fee.
Relying on unofficial websites for changes to the recruitment schedule.
Documents Required for UPSSSC JE Recruitment 2026
Candidates should keep the following documents and information ready before applying:
PET-2025 registration details and scorecard information.
Educational certificates and marksheets.
Engineering diploma, degree, ITI, or other relevant technical qualification certificates.
Proof of date of birth, where required.
Category certificate, if applicable.
EWS or horizontal-reservation documents, where applicable.
Experience or preferential qualification documents, if required for the selected post.
Registered mobile number and email address.
Application fee payment confirmation.
The exact documents required at the application and verification stages should be checked in the respective official notification.
UPSSSC JE Selection Process 2026
The UPSSSC JE Selection Process consists of four stages, and the PET-2025 scorecard decides who will appear in the written exam; the final merit is based on the written exam.
Stage
Details
PET-2025 Shortlisting
Up to 15 times the number of vacancies, category-wise, on normalised PET score
Main Exam
100 objective questions, 100 marks
Document Verification
Certificates checked
Final Selection
Main exam merit + post preference
What Is the UPSSSC JE Exam Pattern 2026?
The UPSSSC JE main exam has a total of 100 questions for 100 marks in 2 hours. It consists of 65 technical, 15 computer and 20 UP general knowledge questions, with a 0.25 (1/4) negative marking.
Subject
Questions
Marks
Technical Subject (Mechanical/Electrical)
65
65
Computer and Information Technology, including technological developments
15
15
General Information Related to Uttar Pradesh
20
20
Total
100
100
Duration: 2 hours (120 minutes)
Question Type: Objective (MCQ)
Negative Marking: 0.25 marks for each wrong answer
Normalization: Scores will be normalized if the exam is held in more than one shift
UPSSSC JE Syllabus 2026
The UPSSSC JE Syllabus 2026 covers technical subjects for Electrical and Mechanical Engineering, Computer and Information Technology, and General Knowledge related to Uttar Pradesh. The written examination consists of 100 objective-type questions carrying 100 marks, with a duration of 2 hours and a negative marking of 25% for each incorrect answer. Candidates can check the Topic-Wise Weightage in the table below.
UPSSSC JE Mechanical Syllabus & Topic-Wise Weightage
The 65 technical questions in the Mechanical paper are distributed across eight subjects. Theory of Machines and Machine Design carry the highest weight at 15 marks.
Subject
Questions / Marks
Theory of Machines and Machine Design
15
Engineering Mechanics
10
Strength of Materials
10
Thermodynamics
5
Internal Combustion (I.C.) Engine
5
Steam Engineering and Power Plant Engineering
5
Refrigeration and Air Conditioning
5
Fluid Mechanics and Hydraulic Machines
10
UPSSSC JE Electrical Syllabus & Topic-Wise Weightage
The 65 technical questions in the Electrical paper are spread evenly across 13 core Electrical Engineering topics, with 5 questions from each. Check the Electrical notification for the full topic list.
Subject
Questions / Marks
Basic Electrical Engineering
5
Magnetic Circuits and Electromagnetism
5
AC Fundamentals and AC Machines
5
Electrical Measurement and Measuring Instruments
5
DC Machines and Transformers
5
Alternators and Synchronous Machines
5
Electrical Generation, Transmission and Distribution
5
Estimation and Costing
5
Electrical Installation and Earthing
5
Power Systems and Economics
5
Cables, Switchgear and Protection Systems
5
Utilization of Electrical Energy
5
Basic Electronics
5
UPSSSC JE Salary 2026
The salary depends on the post and department. Most Junior Engineer positions and certain related technical posts fall under Pay Level 6.
Post
Pay Scale
Junior Engineer (Mechanical/Electrical) and specified technical posts
₹35,400–₹1,12,400
Mechanic, UPSRTC
₹5,200–₹20,200, as listed in the recruitment details
Electrician, UPSRTC
₹5,200–₹20,200, as listed in the recruitment details
Assistant Storekeeper, UPSRTC
₹5,200–₹20,200, as listed in the recruitment details
Staff Selection Commission will release the SSC JE Score Card 2026 of the Junior Engineer for the Tier 1 exam at the official website www.ssc.gov.in. Candidates who appeared in the Junior Engineer examination will be able to download their scorecard online using their login credentials through the link given in this article when scorecard will be released. Candidates can check the official SSC JE Tier 1 Score Card PDF updates and the steps to download it through this article.
SSC JE Score Card 2026
The SSC JE Score Card 2026 for the Tier 1 (Paper 1) exam will be made available by the Staff Selection Commission on ssc.gov.in. Candidates who appeared in the computer-based test will be able to view their individual marks through the candidate login. The scorecard date has not been notified, and this page will be updated when the link goes live.
SSC JE 2026 Score Card: Overview
Candidates can check this section for more details about the SSC JE 2026 Marks. The key information related to the SSC JE 2026 Score Card is given in the table below:
Paper 1, Paper 2, Document Verification and Medical Examination
Official Website
ssc.gov.in
SSC JE Scorecard Download Link
The scorecard PDF will open only after a candidate logs in on the SSC portal. We will add the direct link here once SSC activates it, which can save you from searching through a slow website on release day. This PDF contains critical information regarding the scorecard, allowing candidates to search for their specific roll numbers.
SSC JE Score Card 2026: Click Here (link active after release)
Steps to Download SSC Junior Engineer Score Card 2026
The steps to be followed for downloading the SSC Junior Engineer Score Card 2026 are given below:
Visit the official website at www.ssc.gov.in.
Look for the ‘scorecard’ or ‘Career’ section on the homepage.
Locate and click on the “SSC Junior Engineer Tier 1 Score Card” Link specifically related to the Junior Engineer scorecard for the year 2026.
The direct link to download the SSC JE 2026 PDF can be displayed on the screen now.
Candidates will download and save the scorecard for future reference.
Details Mentioned on SSC Junior Engineer Score Card 2026
After downloading the SSC Junior Engineer Score Card 2026, candidates are advised to review the scorecard carefully. If candidates find any type of mistake in the scorecard, contact the SSC authorities for corrections. The following details are mentioned in the SSC JE Scorecard:
Roll Number
Registration Number
Examination Name
Interview/skill test date
Category
Total Marks Obtained
Qualifying Status
Skill Test Marks
Panel Position
SSC JE Previous Year Cut-Off 2026
Category
Civil Cut-off Marks
Electrical/Mechanical Cut-off
SC
109.24462
112.05213
ST
106.85210
102.86832
OBC
124.45815
127.30120
EWS
117.90628
115.36583
UR
127.22748
127.30120
OH
101.82395
102.38689
HH
57.64407
66.59578
Others PwD
40.01300
44.18208
What is after the SSC JE Tier 1 Score Card 2026?
After the SSC JE Score Card will be released, the selection process enters its 2nd stage of selection process.
Tier 2 Preparation: Shortlisted Candidates must immediately focus on the Tier 2 exam, which is a specialised engineering-based Computer-Based Test (CBT).
Document Verification (DV): Those shortlisted candidates in Tier 2 will be called for DV, where educational certificates, caste certificates, and experience proofs are verified.
Final Merit List: The final SSC JE Result 2026 will be prepared based on the combined scores of both CBT 1 and CBT 2.
Bharat Heavy Electricals Limited (BHEL) has announced the BHEL Artisan Recruitment 2026 Notification under Advt. No. 01/2026. A total of 660 Artisan Grade IV vacancies have been released for seven ITI trades across nine manufacturing units in India. Candidates who have passed Class 10 and possess the required ITI/NTC and National Apprenticeship Certificate (NAC) in the relevant trade can apply online through the official BHEL careers portal.
The online application process for 7 trades (Fitter, Welder, Turner, Machinist, Electrician, Electronics Mechanic and Foundryman) started on 21 October & candidates can apply till the last date, 18 November 2026 (11:45 PM). Selection is through a computer-based test (tentatively on 11 December 2026) & document verification.
BHEL Artisan Recruitment 2026: Latest Update
Candidates interested in BHEL Artisan Grade-IV posts should check the latest recruitment updates below:
BHEL has announced 660 tentative Artisan Grade IV vacancies across nine manufacturing units.
The recruitment includes seven trades: Fitter, Welder, Turner, Machinist, Electrician, Electronics Mechanic, and Foundryman.
The online application process started on 21 October 2026 and will close on 18 November 2026 at 11:45 PM.
The tentative Computer-Based Examination date is 11 December 2026.
BHEL issued Corrigendum 01/2026 on 26 October 2026, revising the date for possessing the required ITI/NAC certificates or mark sheets.
BHEL issued another corrigendum in November 2026 regarding alternative NAC qualification routes. Candidates should read the revised instructions before applying.
Candidates can select only one manufacturing unit and one trade for this recruitment.
BHEL Artisan Notification 2026 PDF
BHEL has released the detailed notification for Artisan Grade IV recruitment under Advertisement No. 01/2026. The notification PDF contains the trade-wise and unit-wise vacancies, eligibility requirements, application dates, fee structure, selection procedure, and service conditions. Candidates should read the notification before completing the application form. A direct link to download the BHEL Artisan Notification 2026 PDF is given below.
BHEL Artisan Recruitment 2026: Overview
Candidates can check the important details of BHEL Artisan Recruitment 2026 in the table below.
The online application starts from 21 October to 18 November 2026, & the CBT exam is scheduled on 11 December 2026 (tentatively).
Event
Date
Notification Release
October 2026
Online Application Starts
21 October 2026
Last Date to Apply Online
18 November 2026
Age and Qualification Cut-off Date
1 October 2026
Computer-Based Examination
11 December 2026 (Tentative)
BHEL Artisan Vacancy 2026
BHEL has announced 660 Artisan Grade IV vacancies across seven trades. Fitter has the highest number of vacancies at 278, followed by Welder with 104 and Machinist with 101. The trade-wise distribution is given below.
BHEL Artisan Trade-Wise Vacancy
Trade
BAP
HPVP
EDN
SBD
HEEP
HPEP
HEP
TP
HPBP
Total
Fitter
48
60
3
16
20
10
19
22
80
278
Welder
6
25
2
2
6
0
3
10
50
104
Turner
10
6
0
6
5
22
3
0
0
52
Machinist
7
14
0
3
14
23
15
10
15
101
Electrician
4
6
20
2
12
5
18
18
5
90
Electronics Mechanic
0
3
20
0
0
0
0
0
0
23
Foundryman
0
6
0
1
3
0
2
0
0
12
Total
75
120
45
30
60
60
60
60
150
660
BHEL Artisan Category-Wise Vacancy (Unit-Wise)
Unit Code
UR
EWS
OBC
SC
ST
Total
PwD
Ex-Servicemen
BAP
32
8
20
14
1
75
4
10
HPVP
47
12
32
20
9
120
5
16
EDN
19
4
12
7
3
45
2
6
SBD
14
2
8
4
2
30
2
4
HEEP
35
6
8
11
0
60
2
8
HPEP
25
6
16
9
4
60
16
9
HEP
24
6
9
9
12
60
5
8
TP
24
7
17
12
0
60
3
8
HPBP
65
15
40
28
2
150
6
21
285
66
162
114
33
660
45
90
BHEL Artisan Vacancy 2026: Manufacturing Unit-Wise Distribution
Unit Code
Manufacturing Unit
Vacancies
BAP
Boiler Auxiliaries Plant
75
HPVP
Heavy Plates and Vessels Plant
120
EDN
Electronics Division
45
SBD
Solar Business Division
30
HEEP
Heavy Electrical Equipment Plant
60
HPEP
Heavy Power Equipment Plant
60
HEP
Heavy Electrical Plant
60
TP
Transformer Plant
60
HPBP
High Pressure Boiler Plant
150
Total
660
BHEL Artisan Units and Locations Details
BHEL has released a total of 660 vacancies across nine Manufacturing Units of BHEL. Candidates can check the unit code, location, & other details here.
Code
BHEL Unit
Location
BAP
Boiler Auxiliaries Plant
Ranipet, Tamil Nadu
HPVP
Heavy Plates and Vessels Plant
Visakhapatnam, Andhra Pradesh
EDN
Electronics Division
Bengaluru, Karnataka
SBD
Solar Business Division
Bengaluru, Karnataka
HEEP
Heavy Electrical Equipment Plant
Haridwar, Uttarakhand
HPEP
Heavy Power Equipment Plant
Hyderabad, Telangana
HEP
Heavy Electrical Plant
Bhopal, Madhya Pradesh
TP
Transformer Plant
Jhansi, Uttar Pradesh
HPBP
High Pressure Boiler Plant
Tiruchirappalli (Trichy), Tamil Nadu
What Is the Qualification for BHEL Artisan 2026?
Candidates need Class 10, an ITI (NTC), & a National Apprenticeship Certificate (NAC). Candidates must have at least 60% marks for General/OBC and 55% marks for SC/ST in both NTC and NAC.
Class 10: Candidates must have passed Class X.
ITI/NTC: A National Trade Certificate (NTC/ITI) in the relevant trade is required.
National Apprenticeship Certificate: Candidates must possess the prescribed NAC in the relevant trade.
Minimum Marks: The published eligibility details specify at least 60% marks for General/OBC candidates and 55% for SC/ST candidates in both NTC/ITI and NAC.
What Is the Age Limit for BHEL Artisan 2026?
The upper age limit for General/EWS is 27 years, for OBC (NCL) is 30 years, & for SC/ST is 32 years, as on 1 October 2026.
Category
Relaxation
Upper Age Limit
General/EWS
Nil
27 years
OBC (NCL)
3 years
30 years
SC/ST
5 years
32 years
Persons with Disabilities (General)
10 years
27 years
Persons with Disabilities (OBC-NCL)
13 years
40 years
Persons with Disabilities (SC/ST)
15 years
42 years
Ex-Servicemen
As per prevailing Government rules
Candidates domiciled in Jammu & Kashmir from 1 January 1980 to 31 December 1989
5 years
32 years
Important Note: The maximum age of a candidate with all permissible age relaxations, must not exceed 56 years as of 1 October 2026.
BHEL Artisan Apply Online 2026 Link
The BHEL Artisan apply online 2026 process started on 21 October 2026 on its official website for 660 vacancies. Candidates must submit their applications through the official BHEL careers portal before the last date, 18 November 2026. Candidates are advised to keep a copy of the submitted application form and payment receipt for future reference. A direct link to apply online is given in the table below.
BHEL Artisan Application Fee 2026
The reported examination and processing fees are given below. Candidates should verify the applicable fee and payment instructions in the official application portal. The fee is generally non-refundable. Additional transaction charges may apply depending on the payment method.
Category
Examination Fee
Processing Fee
Total
General/EWS/OBC
₹600
₹400 + GST
₹1,072
SC/ST/PwBD/Ex-Servicemen
Nil
₹400 + GST
₹472
How to Apply Online for BHEL Artisan Recruitment 2026
The detailed application instructions will be hosted on the official BHEL Careers portal by 19 October 2026. The complete online application procedure and registration dates should be checked once the detailed instructions are available. Candidates can prepare for the application process by following these steps:
Open the Artisan Recruitment 2027 section under Advertisement No. 01/2026.
Read the detailed notification and confirm your eligibility.
Check the trade-wise and manufacturing-unit-wise vacancies.
Register using the details requested in the online application form.
Enter your personal, educational, & other required information.
Upload the photograph, signature, & other required documents in the prescribed format.
Pay the applicable examination fee.
Recheck the completed form before submitting it.
Download or print the submitted application form and payment receipt for future reference.
BHEL Artisan Selection Process
The selection process for BHEL Artisan Recruitment 2026 consists of two stages: Computer Based Test (CBT) and Document Verification (DV). Candidates must qualify as per the prescribed selection criteria and fulfil the eligibility requirements to proceed through the recruitment process.
Computer Based Test (CBT): Candidates will appear for an online examination to assess their knowledge and skills relevant to the recruitment. The CBT is tentatively scheduled for December 2026 and will be conducted on the same day for all advertised vacancies.
Document Verification (DV): Candidates shortlisted based on the selection criteria will have to produce their original educational certificates, trade qualifications, age proof, category certificates (where applicable), and other required documents for verification.
Documents Required for BHEL Artisan Application
Candidates should keep the following documents and information ready before filling out the application form:
Class 10 certificate and marksheet
ITI/NTC certificate and marksheet
National Apprenticeship Certificate (NAC) and marksheet
Date of birth proof
Recent photograph and signature, as required
Valid email address and mobile number
Caste/category certificate, if applicable
OBC-NCL or EWS certificate, if applicable
PwBD certificate, if applicable
Relevant work experience certificate, if claiming age relaxation
Ex-servicemen documents, if applicable
Online payment details, where applicable
BHEL Artisan Selection Process 2026
BHEL Artisan selection process has two stages: a computer-based test (CBT) & document verification.
Stage
Details
CBT
120 questions, 120 marks, 90 minutes
Document Verification
Original certificates checked for shortlisted candidates
BHEL Artisan Exam Pattern 2026
BHEL Artisan exam pattern contains 120 questions for 120 marks, with a total duration of 90 minutes.
Candidates will get ₹24,000 per month while working as temporary artisans for one year, then move to the regular pay scale of ₹29,500–₹65,000 as Artisan Grade IV.
Important Instructions for BHEL Artisan Applicants
Before applying, candidates should keep the following points in mind:
Check that your ITI/NTC and NAC certificates match the trade you select.
Make sure you meet the required marks and age criteria.
Choose your preferred manufacturing unit carefully.
Review the category-wise reservation and relaxation rules.
Keep copies of the application form and fee receipt.
Check the BHEL Careers portal regularly for updates to the examination schedule and recruitment instructions.
FAQs on BHEL Artisan Recruitment 2026
Q1. How many vacancies are announced under BHEL Artisan Recruitment 2026? Ans. Bharat Heavy Electricals Limited (BHEL) has announced 660 Artisan Grade IV vacancies across nine manufacturing units.
Q2. Which trades are included in BHEL Artisan Recruitment 2026? Ans. The recruitment covers seven trades: Fitter, Welder, Turner, Machinist, Electrician, Electronics Mechanic, and Foundryman.
Q3. What is the educational qualification required for BHEL Artisan Grade IV posts? Ans. Candidates must have passed Class X and possess an NTC/ITI certificate and a National Apprenticeship Certificate (NAC) in the respective trade. General and OBC candidates need at least 60% marks, while SC/ST candidates need at least 55% marks in both NTC/ITI and NAC.
Q4. What is the age limit for BHEL Artisan Recruitment 2026? Ans. The upper age limit, calculated as of 1 October 2026, is 27 years for General/EWS candidates, 30 years for OBC (NCL) candidates and 32 years for SC/ST candidates. Applicable relaxations are subject to the official rules.
Q5. What is the selection process for BHEL Artisan Recruitment 2026? Ans. The selection process consists of two stages: Computer-Based Test (CBT) and Document Verification (DV). Candidates must meet the prescribed selection criteria and eligibility requirements.
Q6. When will the BHEL Artisan Exam 2026 be conducted? Ans. The Computer-Based Test is tentatively scheduled for December 2026. Candidates should check the official BHEL Careers website for the confirmed examination date.
Q7. Can candidates apply for more than one manufacturing unit? Ans. No. According to the recruitment notification, a candidate can apply for vacancies in only one manufacturing unit. Candidates should check trade-wise vacancy availability before selecting their preferred unit.
Q8. When will the BHEL Artisan online application process start? Ans. The online application started on 21 October 2026 on the official BHEL Careers portal.
Q9. What is the last date to apply for BHEL Artisan Recruitment 2026? Ans. The last date to apply online for BHEL Artisan Recruitment is 18 November 2026.
Q10.What is the salary of a BHEL Artisan Grade-IV employee? Ans. The initial consolidated wage is ₹24,000 per month during the one-year temporary period. The reported regular pay scale after regularisation is ₹29,500–₹65,000.
Q11. What is the application fee for BHEL Artisan Recruitment 2026? Ans. The reported total fee is ₹1,072 for General/EWS/OBC candidates and ₹472 for SC/ST/PwBD/ex-servicemen candidates. Applicants should confirm the fee in the official notification before payment.
The Indian Space Research Organisation (ISRO) has released the ISRO Scientist Engineer Answer Key 2026 for the Computer-Based Test (CBT) conducted for Scientist/Engineer ‘SC’ posts. Candidates who appeared for the examination can now check the provisional answer key and their recorded responses through the official portal.
The answer key was released on 12 November 2026 under Advertisement No. ISRO: ICRB:03(EMC):2026. Candidates who find any incorrect answers in the provisional key can submit their objections online by 15 November 2026 (1:00 PM).
This is an important opportunity for candidates to verify their answers, estimate their expected scores, and challenge any incorrect questions before the objection window closes. Check the answer key download link, objection process, important dates, and other details below.
ISRO Scientist Engineer Answer Key 2026: Overview
Particulars
Details
Organisation
Indian Space Research Organisation (ISRO)
Recruitment Board
ISRO Centralised Recruitment Board (ICRB)
Post Name
Scientist/Engineer ‘SC’
Advertisement Number
ISRO:ICRB:03(EMC):2026
Disciplines
Electronics, Mechanical and Computer Science
Total Vacancies
175
Exam Mode
Computer-Based Test (CBT)
Exam Date
29 October 2026
Answer Key Release Date
12 November 2026
Objection Starting Date
12 November 2026
Last Date to Raise Objection
15 November 2026
Objection Closing Time
1:00 PM
Selection Process
CBT and Personal Interview
Official Website
isro.gov.in
ISRO Scientist Engineer Answer Key 2026 Download Link
ISRO has activated the provisional answer key and objection facility for candidates who appeared in the Scientist/Engineer ‘SC’ examination. Candidates can access the answer key and their recorded responses through the official objection management portal. To check the answer key, candidates need to visit the official ISRO website or use the direct link provided below.
The ISRO Scientist Engineer Response Sheet 2026 contains the answers marked by candidates during the Computer-Based Test held on 29 October 2026. Candidates can access their recorded responses along with the provisional answer key through the official objection management portal.
How to Download ISRO Scientist Engineer Answer Key 2026?
Candidates can follow these simple steps to download their provisional answer key and response sheet:
Visit the official ISRO website at www.isro.gov.in.
Open the Careers section on the homepage.
Find the notice titled ISRO: ICRB:03(EMC):2026 – Answer Keys & Objections to the Answer Keys.
Click on the answer key and objection management link.
Log in using the required candidate credentials.
Open your provisional answer key and recorded response sheet.
Download the documents and save them for future reference.
ISRO Scientist Engineer Objection Window 2026
ISRO has opened the provisional answer key objection link for candidates who appeared in the Scientist/Engineer CBT 2026 on 12 November 2026 at 1:00 PM & candidates can raise objections until 15 November 2026 at 1:00 PM. Candidates should compare the provisional answer key with their recorded responses. If they find an incorrect answer, they can challenge it through the official objection management portal by selecting the relevant question and providing supporting evidence.
How to Raise an Objection Against ISRO Scientist Engineer Answer Key 2026?
If candidates find any incorrect answer in the provisional answer key, they can challenge it through the official objection portal. ISRO will accept objections only through the prescribed online link.
Visit the official ISRO Careers website.
Open the ISRO Scientist Engineer Answer Key 2026 notification.
Click on the objection management portal link.
Log in using your registered credentials.
Select the question against which you want to raise an objection.
Provide the correct answer with a valid explanation.
Upload supporting documents or references, wherever required by the portal.
Review the details carefully and submit your objection.
Save the acknowledgment or confirmation for future reference.
Note: Candidates must submit their objections before 15 November 2026 (1:00 PM). ISRO has clearly mentioned that objections received through any other mode will not be accepted.
FAQs on ISRO Scientist Engineer Answer Key 2026
Q1. Is ISRO Scientist Engineer Answer Key 2026 released? Ans. Yes, ISRO released the provisional Scientist Engineer Answer Key 2026 on 12 November 2026 for the CBT conducted on 29 October 2026.
Q2. What is the last date to raise objections against the ISRO Answer Key 2026? Ans. The last date to submit objections is 15 November 2026, up to 1:00 PM.
Q3. Where can I download the ISRO Scientist Engineer Answer Key 2026? Ans. Candidates can download their answer key and response sheet through the official ISRO objection management portal.
Q4. What is the advertisement number for ISRO Scientist Engineer Recruitment 2026? Ans. The advertisement number is ISRO:ICRB:03(EMC):2026.
Q5. How many vacancies are available under ISRO Scientist Engineer Recruitment 2026? Ans. There are 175 vacancies for Scientist/Engineer ‘SC’ posts in Electronics, Mechanical and Computer Science disciplines.
Q6. Can I raise objections through email? Ans. No. ISRO has specified that objections must be submitted through the given online portal. Objections received through other modes will not be entertained.
Q7. What is the examination date for ISRO Scientist Engineer 2026? Ans. The Computer-Based Test was conducted on 29 October 2026.
Q8. What happens after the ISRO Scientist Engineer Answer Key 2026 objection process? Ans. ISRO will consider the objections received from candidates and proceed with the further selection process according to its recruitment rules. Candidates should regularly check the official website for updates.
The Staff Selection Commission (SSC) will declare the SSC JE Tier 1 (Paper 1) Result 2026 on the official website, ssc.gov.in soon. Phase 1 of the exam was held from 2 to 6 November 2026, and Phase 2 for Junior Engineer (Telecommunication) is scheduled for 30 November and 1 December 2026.
SSC has not announced an official Tier 1 result date yet. Once the result is out, candidates can download the merit list PDF with the roll numbers of those shortlisted for Paper 2. Read the article below to get more information and updates, steps to download the Tier 1 result.
SSC JE Tier 1 Result 2026
The result will be published online by the Staff Selection Commission in the form of a merit list PDF on ssc.gov.in. Candidates who score at or above the category-wise cut-off in Paper 1 will find their roll numbers in this list and move on to Paper 2. Because Phase 2 for Junior Engineer (Telecommunication) is still to be held on 30 November and 1 December 2026, the Paper 1 result is likely to follow only after all phases and the answer key process are complete.
Once the result is declared, this section will carry the direct download link, the number of candidates shortlisted and the category-wise cut-off marks.
SSC JE Tier 1 Result 2026: Overview
The table below summarises the key details of the SSC JE Paper 1 examination and the current status of its result. Candidates can use it for a quick look at the exam dates, the post and the official website.
Particulars
Details
Exam Conducting Body
Staff Selection Commission (SSC)
Examination Name
SSC Junior Engineer 2026 Examination
Post Name
Junior Engineer & Scientific Assistant
Paper
Paper 1 (Tier 1, CBT)
Phase 1 Exam Dates
2 to 6 November 2026
Phase 2 Exam Dates
30 November & 1 December 2026 (Junior Engineer, Telecommunication)
Result Status
To be out soon
Result Date
To be announced by SSC
Result Mode
Online (merit list PDF)
Official Website
ssc.gov.in
SSC JE Tier 1 Result 2026 PDF
The SSC JE Tier 1 result will be released as a PDF on ssc.gov.in. It will list the roll numbers of candidates shortlisted for Paper 2, and candidates can search for their roll number or name in it. The direct link will be activated here once the result is out.
SSC JE Tier 1 Result 2026 PDF (to be Active soon)
Steps to Download SSC JE Tier 1 Result 2026
Candidates can download the result PDF from the official website in a few simple steps. Keep your roll number or registration number handy so you can find your name quickly in the list.
First, visit the official Staff Selection Commission website at ssc.gov.in.
Go to the Career section on the Home Page.
Click the link titled “Result Notification” for the Junior Engineer post.
The notice PDF will open on the screen.
Scroll down and look for the link to the select list/result PDF.
Download and save the result PDF for future reference.
Details Mentioned on SSC JE Tier 1 Result 2026
Date of Exam
Advertisement Number
Candidates Rank
Roll Number
Registration Number
Applied Category
Selected Category
Date of Birth
Gender
Post Name
Total marks out of 100
Total marks out of 150
SSC JE Tier 1 Cut Off 2026
SSC will release the cut-off marks along with or after the result. Cut-offs are category-wise (UR, EWS, OBC, SC, ST) and depend on the number of vacancies, the difficulty level and the number of candidates who appeared. They will be added here once published.
What Happens After the SSC JE Tier 1 Result?
Qualifying in Paper 1 is only the first step in the SSC JE selection process. The stages below show what shortlisted candidates can expect next, based on how earlier cycles were conducted.
Paper 2: Candidates who qualify in Paper 1 appear for the next stage as per the official schedule.
Document Verification (DV): Candidates shortlisted after all stages are called for DV.
Final Result and Allocation: Selection follows merit and preferences. In earlier cycles, SSC conducted the First Round of Tentative Allocation (FRTA), where candidates were given departments such as CPWD, MES and BRO based on rank and choices, followed by a sliding/identity verification process before the final result.
SSC JE FRTA 2026
SSC JE FRTA means First Round of Tentative Allocation. In SSC JE, it is part of the final result where candidates are given their first post and department based on their rank and choices. Selected candidates are matched with departments like CPWD, MES, and BRO according to their merit and preferences.
Bharat Electronics Limited (BEL) has released the BEL Probationary Engineer Recruitment 2026 notification for 350 vacancies in Electronics & Mechanical Engineering disciplines. The recruitment is released under Advertisement No. 17556/HR/All-India/2026 for Probationary Engineer posts in E-II Grade.
The online application process started on 28 October 2026, and eligible candidates with a four-year B.E./B.Tech./B.Sc. Engineering degree in the prescribed discipline can apply online till 18 November 2026 at 11:59 PM through the official BEL website. The selection process includes a Computer-Based Test (CBT) & interview. The CBT is tentatively scheduled for 22 December 2026.
BEL Probationary Engineer Notification 2026 PDF
Bharat Electronics Limited has released the official notification for Probationary Engineer posts in Electronics and Mechanical disciplines under Advertisement No. 17556/HR/All-India/2026. The notification contains information about the vacancies, educational qualifications, age limit, application fee, selection process, examination details, salary, posting locations, and other recruitment conditions. A direct link to download the BEL Probationary Engineer Notification PDF is given below.
BEL Probationary Engineer Recruitment Important Dates 2026
Candidates should keep track of the following dates to avoid missing any stage of the recruitment process.
Event
Date
Notification Release Date
28 October 2026
Apply Online Starts
28 October 2026, 2:00 PM
Apply Online Ends
18 November 2026, 11:59 PM
CBT Exam
22 December 2026 (Tentative)
Admit Card
To be Notified
BEL Probationary Engineer Vacancy 2026
BEL has announced 350 Probationary Engineer vacancies, including 200 posts in Electronics and 150 posts in Mechanical Engineering. The category-wise vacancy distribution is provided below.
BEL Discipline-Wise Vacancy 2026
Discipline
Vacancies
Electronics
200
Mechanical
150
Total
350
BEL Category-Wise Vacancy 2026
The category-wise vacancy distribution provided in the recruitment details is given below.
Candidates must possess a four-year B.E./B.Tech./B.Sc. Engineering degree in the relevant discipline from an AICTE-approved college or institution.
Post
Required Educational Qualification
Probationary Engineer (Electronics)
B.E./B.Tech./B.Sc. Engineering in Electronics, Electronics and Communication, Electronics and Telecommunication, Communication, or Telecommunication
Probationary Engineer (Mechanical)
B.E./B.Tech./B.Sc. Engineering in Mechanical
Important Note: Candidates with first-class AMIE, AMIETE or GIETE qualifications in the prescribed disciplines are also eligible.
Minimum Educational Marks Required
Category
Required Class
General / UR
First Class
OBC (NCL)
First Class
EWS
First Class
SC
Pass Class
ST
Pass Class
PwBD
Pass Class
BEL Probationary Engineer Age Limit 2026
The maximum age limit for Unreserved (UR) & EWS candidates is 25 years as of 1 October 2026.
Category
Age Relaxation
Maximum Age Limit
UR/EWS
Nil
25 years
OBC (NCL)
3 years
28 years
SC/ST
5 years
30 years
PwBD
10 years
35 years
PwBD + OBC (NCL)
13 years
38 years
PwBD + SC/ST
15 years
40 years
Ex-Servicemen
As per Government rules
BEL Probationary Engineer Apply Online Link
The BEL Probationary Engineer online application process has started on the official website. Eligible candidates can apply for the Electronics and Mechanical posts through the official website till the last date, 18 November 2026 at 11:59 PM. Candidates should complete their application process before the deadline to avoid last-minute technical problems. A direct link to BEL Probationary Engineer Apply Online 2026 is given below.
BEL Application Fee 2026
Candidates must pay the prescribed application fee online, where applicable. The fee structure is as follows:
Category
Application Fee
General/UR
Rs 1000/- + GST = ₹1,180
EWS
Rs 1000/- + GST = ₹1,180
OBC (NCL)
Rs 1000/- + GST = ₹1,180
SC/ST
Exempted
PwBD/Ex-Servicemen
Exempted
How to Apply Online for BEL Probationary Engineer Recruitment 2026
Eligible candidates can submit their application through the official BEL website once the registration link becomes active. The online application process is scheduled to open on 28 October 2026. Candidates can follow these steps to complete the application:
Visit the official website of Bharat Electronics Limited at bel-india.in.
Open the Careers section and find the Probationary Engineer Recruitment 2026 notification.
Read the advertisement and confirm your eligibility for the relevant discipline.
Select the online registration link and enter your personal and contact details.
Verify your registered mobile number and email address using the required OTPs.
Log in with the registration credentials generated by the portal.
Fill in your educational qualifications, category details, and other required information.
Select the examination centres as instructed in the application form.
Upload your photograph, signature, and other required documents in the prescribed format.
Preview the application form carefully and correct any errors before submitting it.
Pay the application fee if applicable and save the payment acknowledgement.
Download or print the final application form for future reference.
Important Note: Candidates must select five preferred examination centres nearest to their correspondence address while applying for the Probationary Engineer posts. BEL may allot a different centre, city or state depending on availability. Requests for changing the allotted centre will not be accepted, and no travel reimbursement will be provided for appearing in the CBT.
BEL Probationary Engineer Documents Required 2026
Candidates applying for BEL Probationary Engineer Recruitment 2026 should keep the required documents ready before filling out the online application form. These documents are needed for registration, uploading details, claiming category benefits, and document verification.
Educational Qualification Certificates: B.E./B.Tech./B.Sc. Engineering degree certificate and relevant mark sheets.
Age Proof: Matriculation/10th certificate or another document accepted under the official notification.
Recent Passport-Size Photograph: Scanned colour photograph in the prescribed format.
Scanned Signature: Signature on white paper using black ink, scanned in the specified format.
Category Certificate: SC/ST/OBC-NCL certificate, if applicable.
EWS Certificate: Valid Income and Asset Certificate, if claiming EWS reservation.
PwBD Certificate: Disability certificate in the prescribed format, if applicable.
Ex-Servicemen Certificate: Required certificate in the prescribed format, if applicable.
CGPA-to-Percentage Conversion Certificate: Required where applicable, particularly at the interview stage.
No Objection Certificate (NOC): For candidates working in Government Departments, PSUs, or Autonomous Bodies, as required.
Valid Email ID and Mobile Number: Required for registration and receiving recruitment updates.
Application Fee Receipt: Payment acknowledgment for candidates required to pay the application fee.
BEL Probationary Engineer Exam Centers 2026
BEL has provided a list of tentative examination centres across different states. Candidates must select five preferred CBT centres nearest to their correspondence address while filling out the application form.
The selection process consists of two stages. Candidates must qualify at the required stages to be considered for final selection.
Selection Stage
Weightage
Computer-Based Test
85 marks
Interview
15 marks
Total
100 marks
BEL Probationary Engineer Exam Pattern 2026
The Computer-Based Test will contain 125 objective-type questions to be completed within 120 minutes. The paper will include technical questions along with General Aptitude and Reasoning questions.
Section
Number of Questions
Marks
Technical Questions
100
100
General Aptitude and Reasoning
25
25
Total
125
125
Important Note: The examination will be conducted in CBT mode for 120 minutes, with 1 mark per question and 0.25 marks deducted for each incorrect answer. No marks will be awarded for unattempted questions. The paper will be available in English and Hindi.
BEL Probationary Engineer Marking Scheme
Particulars
Details
Examination Mode
Computer-Based Test
Question Type
Objective-type
Total Questions
125
Total Marks
125
Exam Duration
120 minutes
Correct Answer
+1 mark
Incorrect Answer
– 0.25 mark
Unattempted Question
0 marks
Exam Language
English and Hindi
BEL Probationary Engineer Qualifying Marks 2026
Candidates must secure the minimum qualifying marks separately in the CBT and interview. The qualifying percentage differs according to the candidate’s category.
Category
Minimum Qualifying Marks
General
35%
OBC-NCL
35%
EWS
35%
SC/ST
30%
PwBD
30%
BEL Probationary Engineer Salary 2026
One of the main attractions of BEL recruitment is its salary package and the opportunity to work in a major Defense PSU. Selected candidates will be appointed as Probationary Engineers in E-II Grade.
Particulars
Details
Pay Grade
E-II
Basic Pay Scale
₹40,000–3%–₹1,40,000
Approximate Annual CTC
₹13 lakh
Additional Benefits
DA, HRA, conveyance allowance, performance-related pay, medical reimbursement, and other admissible benefits
BEL Probationary Engineer Training and Service Agreement
Selected candidates will undergo six months of orientation and on-the-job training. They must also sign a service agreement to serve BEL for two years.
Particulars
Details
Training Duration
Six months
Training Type
Orientation and on-the-job training
Service Agreement Period
Two years
Service Agreement Amount
₹2 lakh in case of breach
BEL Probationary Engineer Posting Locations 2026
State
Posting Locations
Karnataka
Bangalore
Uttar Pradesh
Ghaziabad
Maharashtra
Pune, Nagpur, Navi Mumbai
Telangana
Hyderabad, Ibrahimpatnam
Tamil Nadu
Chennai
Andhra Pradesh
Palasamudram, Nimmaluru, Machilipatnam
Haryana
Panchkula
Uttarakhand
Kotdwara
BEL Probationary Engineer Training and Service Agreement
Selected candidates will undergo six months of orientation and on-the-job training. They must also execute a service agreement to serve BEL for two years.
Particulars
Details
Training Duration
6 months
Training Type
Orientation and on-the-job training
Service Agreement Period
2 years
Service Agreement Amount
₹2,00,000 in case of breach
FAQs on BEL Probationary Engineer Recruitment 2026
Q1. How many vacancies are announced under BEL Probationary Engineer Recruitment 2026?
Ans. BEL has announced a total of 350 Probationary Engineer vacancies, including 200 posts in Electronics and 150 posts in Mechanical Engineering.
Q2. What is the last date to apply for BEL Probationary Engineer Recruitment 2026? Ans. The last date to submit the online application form is 18 November 2026 at 11:59 PM.
Q3. When did the BEL Probationary Engineer application process start? Ans. The online application process started on 28 October 2026 at 2:00 PM.
Q4. What is the educational qualification required for BEL Probationary Engineer posts? Ans. Candidates must possess a four-year B.E., B.Tech. or B.Sc. Engineering degree in the prescribed Electronics or Mechanical discipline from an eligible institution.
Q5. What is the age limit for BEL Probationary Engineer Recruitment 2026? Ans. The maximum age limit for General/UR and EWS candidates is 25 years as on 1 October 2026. Age relaxation is available for eligible reserved categories.
Q6. What is the application fee for BEL Probationary Engineer Recruitment 2026? Ans. General, EWS and OBC (NCL) candidates must pay ₹1,180, including GST. SC, ST, PwBD and Ex-Servicemen candidates are exempted from the application fee.
Q7. What is the selection process for BEL Probationary Engineer 2026? Ans. The selection process includes a Computer-Based Test followed by an interview. The CBT carries 85% weightage, while the interview carries 15% weightage.
Q8. What is the BEL Probationary Engineer exam date for 2026? Ans. The CBT is tentatively scheduled for 22 December 2026. Candidates should check the official BEL website for any changes to the examination schedule.
Q9. Is there negative marking in the BEL Probationary Engineer CBT? Ans. Yes, negative marking of 0.25 marks applies for every incorrect answer.
Q10. What is the salary of a BEL Probationary Engineer? Ans. Selected candidates will be appointed in E-II Grade with a pay scale of ₹40,000–₹1,40,000 and an approximate annual CTC of ₹13 lakh.
Q11. How many questions are asked in the BEL Probationary Engineer CBT? Ans. The CBT consists of 125 objective-type questions, including 100 technical questions and 25 general aptitude and reasoning questions. The examination duration is 120 minutes.
The Chhattisgarh State Power Companies have announced CSPDCL Recruitment 2026 for 1,501 vacancies across three state-owned power companies: Chhattisgarh State Power Distribution Company Limited (CSPDCL), Chhattisgarh State Power Transmission Company Limited (CSPTCL), and Chhattisgarh State Power Generation Company Limited (CSPGCL).
The recruitment notification was released on 5 November 2026 under Advertisement No. 1/2026 for Class-II posts and Advertisement No. 2/2026 for Class-III and IV posts. The vacancies include Assistant Engineer (AE), Junior Engineer (JE), Data Entry Operator (DEO), Plant Attendant, Stenographer, Fire Attendant and other technical and non-technical positions.
CSPDCL Recruitment 2026: Latest Update
The online application process started on 6 November 2026 at 8:00 PM. Eligible candidates can submit their applications online until 26 November 2026 at 11:55 PM through the official recruitment portal.
CSPDCL released the detailed recruitment notification on 5 November 2026 for vacancies across CSPDCL, CSPTCL and CSPGCL.
The detailed advertisement contains 195 Class-II and 1,306 Class-III and IV vacancies, adding up to 1,501 posts.
Online applications started on 6 November 2026 at 8:00 PM.
The last date to submit the application form and pay the fee is 26 November 2026 at 11:55 PM.
The recruitment includes AE, JE, DEO, Plant Attendant, Stenographer, Fire Attendant, and other posts.
The online CBT date and admit card release date have not been announced yet.
Candidates should check the official website, cspc.co.in, for recruitment notices and further updates.
Chhattisgarh State Power Transmission Company Limited (CSPTCL)
Participating Companies
CSPDCL, CSPTCL, & CSPGCL
Recruitment Name
CG State Power Companies Recruitment 2026
Notice Number
1/2026 (Class-II) & 2/2026 (Class-III & IV)
Notification Date
5 November 2026
Advertisement Numbers
1/2026 and 2/2026
Class-II Vacancies
195
Class-III and IV Vacancies
1,306
Total Vacancies
1,501
Posts
AE, JE, DEO, Attendant, Stenographer and Others
Application Mode
Online
Application Start Date
6 November 2026
Last Date to Apply
26 November 2026
Selection Process
CBT and post-specific interview, physical or skill tests
Job Location
Chhattisgarh
Official Website
cspc.co.in
Helpdesk
+91 7353009191 (9 AM to 6 PM), csptclrecruitment@gmail.com
CSPTCL Recruitment 2026 Notification PDF
CSPTCL has issued two detailed advertisements for recruitment across the three state power companies. Advertisement 1/2026 covers Class-II posts, while Advertisement 2/2026 covers Class-III and Class-IV posts. Candidates can download the official notification PDF through the direct link below,
Candidates must complete the application and fee payment within the prescribed schedule. The online application window will remain open until 26 November 2026.
Event
Date and Time
Detailed Notification Release
5 November 2026
Online Application Starts
6 November 2026, 8:00 PM
Last Date to Apply Online
26 November 2026, 11:55 PM
Last Date for Fee Payment
26 November 2026, 11:55 PM
CBT Exam Date
To Be Announced
Admit Card Release
To Be Announced
CG Power Transmission Vacancy 2026
The CSPTCL Recruitment 2026 has a total of 1,501 vacancies across Assistant Engineer, Junior Engineer, Data Entry Operator, & other posts. Candidates can check detailed vacancies here.
Company-Wise Vacancy Distribution
Company
Vacancies
Chhattisgarh State Power Generation Company Limited (CSPGCL)
572
Chhattisgarh State Power Transmission Company Limited (CSPTCL)
102
Chhattisgarh State Power Distribution Company Limited (CSPDCL)
650
Common Cadre of All Three Companies
177
Total
1501
Detailed Category-Wise Vacancy
Post
CSPDCL
CSPTCL
CSPGCL
Common
Total
AE Mechanical
–
–
26
–
26
AE Electrical
62
6
24
–
92
AE Electronics / E&TC
4
–
6
–
10
AE Computer Science
–
–
2
–
2
AE Information Technology
–
–
2
–
2
AE Civil
–
–
–
20
20
Programmer
3
–
–
–
3
Accounts Officer / Asst. Manager (F&A)
–
–
–
15
15
Medical Officer
–
–
–
15
15
Fire Officer
–
–
1
–
1
Security Officer
–
–
3
–
3
Shift Chemist
–
–
6
–
6
JE Mechanical
–
–
12
–
12
JE Electrical
124
32
11
–
167
JE Electronics / E&TC
7
–
2
–
9
JE Computer Science
–
–
1
–
1
JE Information Technology
–
–
1
–
1
JE Civil
–
–
–
26
26
Data Entry Operator
450
64
95
–
609
Attendant (Plant) Gr. III
–
–
300
–
300
Fire Attendant Gr. II
–
–
45
–
45
Sub Fire Officer
–
–
6
–
6
Security Inspector
–
–
10
–
10
Security Sub Inspector
–
–
19
–
19
Stenographer Gr. III (English)
–
–
–
12
12
Stenographer Gr. III (Hindi)
–
–
–
13
13
Assistant Law Officer
–
–
–
8
8
Assistant Industrial Relations Officer
–
–
–
8
8
Assistant Pharmacist
–
–
–
25
25
Assistant Staff Nurse
–
–
–
18
18
Assistant Lab Technician
–
–
–
6
6
Assistant Radiographer
–
–
–
3
3
Assistant Dresser
–
–
–
5
5
Assistant ECG Technician
–
–
–
3
3
Total
650
102
572
177
1,501
CG State Power Company Class-II Vacancy 2026
Post Name
Vacancies
Assistant Engineer (Mechanical, Electrical, Electronics, CS, IT and Civil)
152
Medical Officer
15
Accounts Officer / Assistant Manager (F&A)
15
Shift Chemist
6
Programmer
3
Security Officer
3
Fire Officer
1
Total
195
CG State Power Company Class-III & IV Vacancy 2026
Post Name
Vacancies
Data Entry Operator
609
Attendant (Plant) Grade III
300
Junior Engineer (Mechanical, Electrical, Electronics, CS, IT and Civil)
216
Fire Attendant Grade II
45
Stenographer Grade III (English and Hindi)
25
Assistant Pharmacist
25
Security Sub Inspector
19
Assistant Staff Nurse
18
Security Inspector
10
Assistant Law Officer
8
Assistant Industrial Relations Officer
8
Sub Fire Officer
6
Assistant Lab Technician
6
Assistant Dresser
5
Assistant Radiographer
3
Assistant ECG Technician
3
Total
1,306
CSPDCL Educational Qualification 2026
The educational qualification differs according to the post. Candidates can check the detailed educational qualification in the table below.
Post Name
Required Educational Qualification
Assistant Engineer (Mechanical)
Four-year B.E./B.Tech./B.Sc. Engineering, AMIE or PTDC in Mechanical or Production Engineering
Assistant Engineer (Electrical)
Four-year engineering qualification in Electrical, Electrical & Electronics or Electrical & Instrumentation
Assistant Engineer (Electronics)
Four-year engineering qualification in Electronics, E&TC or Electronics & Instrumentation
Assistant Engineer (CS/IT)
Four-year engineering qualification in Computer Science or Information Technology
Assistant Engineer (Civil)
Four-year engineering qualification in Civil Engineering
Junior Engineer
Three-year Diploma or four-year Engineering Degree in the relevant discipline
Programmer
Engineering Degree in CS/IT or MCA
Accounts Officer / Assistant Manager
CA, CMA or ICWA
Medical Officer
MBBS degree and Medical Council registration
Fire Officer
Bachelor’s Degree in Fire Engineering
Security Officer
Graduation with at least 3 years of prescribed defense, paramilitary or police service
Shift Chemist
Full-time M.Sc. Chemistry with minimum Second Division
Assistant Law Officer
LL.B. with minimum Second Division and Bar Council registration
Assistant Industrial Relations Officer
Master’s Degree in Sociology/Social Science with Second Division or MSW
Data Entry Operator
Relevant CS/IT degree or another bachelor’s degree with one of the prescribed computer qualifications
Stenographer Grade III
Graduation with the prescribed computer, typing and shorthand qualifications
Assistant Lab Technician
10+2 with Biology, Physics and Chemistry, DMLT/BMLT and valid registration
Assistant Pharmacist
10+2 with Physics and Chemistry, D.Pharm/B.Pharm and Chhattisgarh Pharmacist registration
Assistant Staff Nurse
B.Sc. Nursing, P.B.B.Sc. Nursing or GNM with Chhattisgarh Nursing Council registration
Assistant Radiographer
10+2 with PCB and a two-year Radiography diploma/certificate with prescribed registration
Assistant Dresser
10+2 with PCB and prescribed Dresser/Orthopedic/Plaster training and registration
Assistant ECG Technician
10+2 with PCB and prescribed ECG/ICCU Technician training and registration
Attendant (Plant) Grade III
Class 10 with at least Second Division and a two-year ITI certificate in the relevant trade
Fire Attendant Grade II
Class 12 with Chemistry and NCC ‘B’ or ‘C’ Certificate
CSPTCL Age Limit 2026
The prescribed age limit varies depending on the post. For most Class-II and Class-III positions, the minimum age requirement is generally 21 years, whereas certain technical and support positions have a minimum age of 18 years. The age eligibility of candidates will be determined as of 1 January 2026.
Post Category
Minimum Age
Maximum Age for CG Domicile
Assistant Engineer, Shift Chemist, Programmer, Accounts Officer and Medical Officer
21 Years
UR Male: 40 Years
UR Female and SC/ST/OBC: 45 Years
Fire Officer
21 Years
UR Male: 30 Years
UR Female and SC/ST/OBC: 35 Years
Security Officer
21 Years
UR Male: 40 Years
UR Female and SC/ST/OBC: 45 Years
Security Inspector and Security Sub-Inspector
21 Years
UR Male: 40 Years
UR Female and SC/ST/OBC: 45 Years
Sub Fire Officer
21 Years
UR Male: 30 Years
UR Female and SC/ST/OBC: 35 Years
Assistant Law Officer and Assistant Industrial Relations Officer
21 Years
UR Male: 40 Years
UR Female and SC/ST/OBC: 45 Years
Stenographer, DEO, Pharmacist and Staff Nurse
21 Years
UR Male: 40 Years
UR Female and SC/ST/OBC: 45 Years
Junior Engineer and specified paramedical posts
18 Years
UR Male: 40 Years
UR Female and SC/ST/OBC: 45 Years
Attendant (Plant) Grade III
18 Years
UR Male: 40 Years
UR Female and SC/ST/OBC: 45 Years
Fire Attendant Grade II
18 Years
UR Male: 25 Years
UR Female and SC/ST/OBC: 30 Years
CG State Power Transmission Company Apply Online Link
The Online Application process for the CG State Power Company Recruitment 2026 has started on 6 November through the official recruitment portal. Candidates can apply till the last date, 26 November 2026 (11:55 PM). Candidates must select the correct advertisement according to their post: Advertisement 1/2026 for Class-II posts or Advertisement 2/2026 for Class-III and IV posts. A direct link to apply online is given below.
Candidates must pay the application fee online while submitting the application form. The fee differs according to the post group and category.
Post Category
UR
OBC
SC/ST
AE, JE, Officer, Security and Fire Officer, Shift Chemist, Programmer and specified other posts
₹800
₹700
₹600
Stenographer, DEO, Paramedical, Attendant and Fire Attendant posts
₹400
₹300
₹200
How to Apply for CG State Power Transmission Recruitment?
Candidates looking for a job opportunity can refer to the steps provided below to apply online.
Visit the official website: cspc.co.in.
Open the Recruitment section and click on the CG State Power Company Recruitment 2026 link.
Complete the registration using your name, mobile number, and email ID.
Select the eligible post and engineering branch, wherever applicable.
Enter your personal, educational, and category details correctly.
Upload your photograph, signature, and required certificates in the prescribed format.
Pay the application fee according to your post and category through the available online payment methods.
Review all details carefully and submit the application form.
Download the submitted application form and payment receipt for future reference.
CGPGCL Selection Process 2026
Candidates will be selected for the recruitment based on performance in various stages. The selection process may vary as per the posts. The selection of candidates will be done tentatively based on the stages provided below.
Post Category
Selection Stages
Assistant Engineer, Accounts Officer, Medical Officer, Programmer and Shift Chemist
CBT, Document Verification and Interview
Fire Officer and Security Officer
CBT, Physical Fitness Examination, Document Verification and Interview
Sub Fire Officer, Security Inspector, Security Sub Inspector and Fire Attendant
CBT, Physical Fitness Examination and Document Verification
Junior Engineer and specified technical/paramedical posts
CBT and Document Verification
Stenographer Grade III
CBT, Shorthand Test, Typing Skill Test and Document Verification
Data Entry Operator
CBT, Hindi and English Typing Test and Document Verification
The Assam Rifles has released the Assam Rifles Recruitment 2026 notification for 354 Group C Technical and Tradesman vacancies under the Technical and Tradesman Recruitment Rally 2026. The vacancies include positions such as Warrant Officer, Havildar, and Rifleman across various technical and tradesman categories. The revised notification was issued on 3 November 2026 vide Memo No. I.12016/A Branch (Rect Cell)/2026/1892. Eligible male Indian citizens can apply online from 15 November to 14 December 2026.
The recruitment advertisement issued earlier was cancelled on 30 October 2026. The recruitment rally is tentatively scheduled to commence on 18 January 2027.
Assam Rifles Recruitment 2026: Latest Update
Candidates can check the latest updates regarding Assam Rifles Recruitment 2026, including the revised vacancy details, application dates, recruitment rally schedule, and selection process.
Assam Rifles has announced 354 Group C Technical and Tradesman vacancies.
The vacancies include Warrant Officer, Havildar, and Rifleman posts across different trades.
The earlier recruitment notification has been canceled, and a fresh notification was issued on 3 November 2026.
The online application process for the revised notification will start on 15 November 2026.
The last date to submit the online application form is 14 December 2026 (11:59 PM).
The recruitment rally is tentatively scheduled to begin on 18 January 2027.
The age cut-off date is 1 July 2026.
The recruitment is open to eligible male candidates as per the prescribed notification.
Candidates must fulfil the required educational, technical, physical, and medical eligibility conditions.
The selection process includes PST/PET, Computer-Based Test (CBT), Trade/Skill Test, Document Verification and Medical Examination.
Candidates who applied under the previous notification should check the revised eligibility criteria and submit a fresh application.
Assam Rifles Recruitment 2026: Overview
Candidates interested in the Technical and Tradesman posts can check the important recruitment details in the table below.
Particulars
Details
Organisation
Directorate General Assam Rifles, Shillong
Department
Ministry of Home Affairs
Recruitment Name
Assam Rifles Technical and Tradesman Recruitment Rally 2026
Post Names
Warrant Officer, Havildar and Rifleman
Total Vacancies
354
Notification Date
3 November 2026
Memo Number
I.12016/A Branch (Rect Cell)/2026/1892
Application Mode
Online
Application Start Date
15 November 2026
Last Date to Apply
14 December 2026
Recruitment Rally
From 18 January 2027 (Tentative)
Eligible Candidates
Male Indian Citizens
Job Category
Group C
Official Website
assamrifles.gov.in
Assam Rifles Notification 2026 PDF
The Assam Rifles Recruitment 2026 Notification PDF contains the complete details of the recruitment, including vacancy distribution, educational qualifications, age limit, physical standards, application fee, selection process, salary, and important instructions. A direct link to download the official notification PDF is given below.
Assam Rifles Important Dates 2026
The application process for the fresh recruitment notification will begin on 15 November 2026. Candidates should complete their registration before the closing date to avoid last-minute technical issues.
Event
Date
Earlier Notification Date
21 September 2026
Earlier Notification Canceled
30 October 2026
Fresh Notification Released
3 November 2026
Online Application Starts
15 November 2026
Last Date to Apply Online
14 December 2026
Last Time for Application
11:59 PM
Recruitment Rally Begins
18 January 2027 onwards (Tentative)
Important Note: The earlier advertisement was cancelled, and a fresh advertisement has been issued. Candidates who submitted an application under the previous notification should apply again and check the revised eligibility requirements.
Assam Rifles Vacancy 2026
A total of 354 vacancies have been announced under the Technical & Tradesman Recruitment Rally 2026. The vacancies are distributed among Warrant Officer, Havildar, and Rifleman posts across technical and tradesman categories. Warrant Officer posts account for 129 vacancies, Havildar posts for 6, and Rifleman posts for 219.
The category-wise vacancy distribution is given below.
Category
Vacancies
SC
53
ST
25
OBC
97
EWS
34
UR
145
Total
354
Assam Rifles Eligibility Criteria 2026
Candidates applying for Assam Rifles Recruitment 2026 must meet the required age, educational, physical, and medical conditions prescribed for their post. Since the recruitment includes different Technical and Tradesman posts, the qualifications and other requirements can vary from one post to another.
Assam Rifles Educational Qualification
The educational qualification varies according to the post. Candidates must have the required qualification from a recognized board/institute and, for technical trades, may also need to qualify the prescribed trade/skill test.
Post/Trade
Qualification
Warrant Officer (Cipher)
10+2 with prescribed relevant qualification
Rifleman technical trades
10th + relevant ITI/trade qualification, as prescribed
Store Keeper Technical
Matriculation with prescribed subjects/requirements
Operation Theatre Technician
10+2 + prescribed technical/medical qualification
Physiotherapist
Prescribed 10+2/degree and technical qualification
Rifleman Mason
10th + prescribed trade/skill requirements
Assam Rifles Age Limit 2026
The age limit is calculated as of 1 July 2026.
The age limit is generally 18 to 23 years for Rifleman posts.
The age limit is generally 18 to 25 years for certain Warrant Officer posts.
Age relaxation is applicable to eligible reserved categories as per the applicable government rules.
Assam Rifles Age Relaxation 2026
As per the Assam Rifles Tradesman (Group C) Recruitment Rules 2026, the age relaxation is provided according to Central Government rules.
Category
Age Relaxation
UR
Nil
SC/ST
5 Years
OBC
3 Years
Physical Standard Test
Physical standards are an important part of this recruitment because candidates have to qualify for the physical selection stages.
The available details mention the following standards for male candidates:
Category/Region
Minimum Height
Chest
General/All India
170 cm
80–85 cm
Garhwalis, Kumaonis, Dogras, Marathas & NE States/HP/J&K/Ladakh
165 cm
78–83 cm
Scheduled Tribes
162.5 cm
76–81 cm
Physical Efficiency Test
Candidates who meet the prescribed physical standards have to qualify the Physical Efficiency Test. Candidates should start physical preparation well before the recruitment stages because clearing the physical test is necessary to move ahead in the selection process.
The available recruitment details mention:
Region
Running Requirement
All India except Ladakh
5 km in 24 minutes
Ladakh
1.6 km in 7 minutes
Assam Rifles Apply Online 2026 Link
The Assam Rifles online application process will start on 28 September 2026 and continue until 28 October 2026. Eligible candidates should complete the application form before the last date and ensure that all required details and documents are submitted correctly.
Assam Rifles Application Fee 2026
The application fee depends on the candidate’s category. The available details mention online payment or SBI Bank Counter Challan as payment options.
Category
Application Fee
General/OBC/EWS*
₹100
SC/ST/Ex-Servicemen
₹0
Women
₹0
How to Apply for Assam Rifles Recruitment 2026?
Candidates can follow these simple steps to submit the application form:
Visit the official Assam Rifles website.
Open the Online Application section.
Select the Technical and Tradesman recruitment link.
Read the eligibility requirements carefully.
Enter your personal and educational details.
Upload the required documents and photographs.
Pay the application fee, if applicable.
Check all details before submitting the form.
Submit the application.
Download and save a copy of the completed form and payment receipt.
Documents Required for Assam Rifles Application Form 2026
Candidates are required to have the following documents
The selection process for Assam Rifles Technical & Tradesman posts generally includes the following stages:
Physical Standard Test (PST)
Physical Efficiency Test (PET)
Written Examination (CBT)
Trade/Skill Test for applicable posts
Document Verification
Medical Examination
Final Merit List based on the prescribed selection criteria.
Assam Rifles CBT Exam Pattern 2026
The Computer-Based Test carries 100 marks. Candidates must obtain the prescribed minimum qualifying marks to remain eligible for the next stages.
Subject
Number of Questions
Marks
English Language
25
25
Reasoning Ability
25
25
Quantitative Aptitude
25
25
General Awareness
25
25
Total
100
100
Marking Scheme
Particulars
Marks
Correct Answer
+1
Incorrect Answer
0
Unattempted Question
0
Total Marks
100
Important Note: No marks are awarded for the Trade Skill Test, and candidates have to qualify in it to continue in the recruitment process.
Minimum Qualifying Marks
Category
Minimum Qualifying Marks
General/EWS
35%
SC/ST/OBC
33%
Assam Rifles Salary 2026
The salary for Assam Rifles posts depends on the post and its pay level. As per the Assam Rifles recruitment rules, Rifleman-level posts are placed in Level 3, while Havildar-level posts are placed in Level 4. In addition to the basic pay, selected candidates may receive admissible allowances and benefits as per Central Government rules. The actual monthly salary will depend on the post, allowances, deductions, and place of posting.
Post Level
Pay Level
Salary Range
Rifleman
Level 3
₹21,700 – ₹69,100
Havildar
Level 4
₹25,500 – ₹81,100
Assam Rifles Rally Date 2026
The Assam Rifles Technical and Tradesman Recruitment Rally is tentatively scheduled to begin from 18 January 2027 onwards. The rally will include the physical and other selection stages prescribed for the respective posts. The PST/PET centres are expected to be in Jorhat or Diphu in Assam. Candidates should check the official Assam Rifles website for their reporting date, centre, and other instructions.
What Documents Are Required for Assam Rifles Rally 2026?
Candidates should keep the following documents ready as applicable:
Printed application form
Valid identity proof
Educational qualification certificates
ITI/Diploma/technical certificates
Domicile/Permanent Residential Certificate
Caste certificate, if applicable
EWS certificate, if applicable
Experience certificate, where required
Driving license for posts where it is prescribed
Application fee payment receipt/challan, where applicable
The Central Warehousing Corporation (CWC) has released the CWC Recruitment 2026 notification under Advt. No. CWC/I-Manpower/DR/Rectt/2026/01. A total of 327 vacancies have been released through the recruitment, which includes 171 Assistant Manager & 156 Junior Executive posts across General, Technical, Finance, Civil, Electrical and Mechanical disciplines.
The online application process started on 17 October 2026, and eligible candidates can submit their applications until 15 November 2026 (11:59 PM). Candidates with the required postgraduate degree, graduation, B.E./B.Tech or B.Sc. qualification can apply for the posts that match their educational background.
CWC Notification 2026 PDF
CWC has published Advertisement No. CWC/I-Manpower/DR/Rectt/2026/01, which contains details about thepost-wise vacancies, educational qualifications, age limit, application fee, salary, selection process, examination pattern, & how to apply. Candidates should read the official notification PDF carefully before applying for the recruitment. A direct link to download the official CWC Notification 2026 PDF is given below.
CWC Recruitment 2026: Overview
Candidates can check the important details of the CWC Assistant Manager & Junior Executive Recruitment 2026 in the table below.
Particulars
Details
Organisation
Central Warehousing Corporation (CWC), a Navratna CPSE
Ministry
Ministry of Consumer Affairs, Food and Public Distribution
Advertisement No.
CWC/I-Manpower/DR/Rectt/2026/01 (dated 17 October 2026)
Candidates should keep track of the important dates to complete their applications within the prescribed period.
Event
Date
Notification Release Date
16 October 2026
Apply Online Starts
17 October 2026
Apply Online Ends
15 November 2026 (11:59 PM)
Age Calculation Date
15 November 2026
Last Date for Fee Payment
15 November 2026
Exam Date
To be announced
Admit Card Release
Around 21 days before the exam
CWC Vacancy 2026
The Central Warehousing Corporation (CWC) has announced 327 vacancies across eight post codes, including 171 posts for Assistant Managers and 156 for Junior Executives. Among these, Junior Executive (General) and Junior Executive (Technical) account for the highest number of vacancies, with 78 posts each. A total of 31 vacancies are available across various engineering disciplines.
Post Name
Number of Vacancies
Assistant Manager (General)
70
Assistant Manager (Technical)
60
Assistant Manager (Finance)
10
Assistant Manager (Engineering – Civil)
22
Assistant Manager (Engineering – Electrical)
5
Assistant Manager (Engineering – Mechanical)
4
Junior Executive (General)
78
Junior Executive (Technical)
78
Total
327
CWC Category-Wise Vacancy
UR has the most vacancies (140), followed by OBC (97), SC (40), EWS (30), and ST (20). In addition, 19 posts are reserved for PwBD, & 22 Junior Executive posts are reserved for Ex-Servicemen.
Category
Assistant Manager
Junior Executive
Total
UR
74
66
140
OBC (NCL)
50
47
97
SC
22
18
40
ST
9
11
20
EWS
16
14
30
Total
171
156
327
PwBD (horizontal)
10
09
19
Ex-Servicemen (horizontal)
–
22
22
CWC Assistant Manager Vacancy 2026
Assistant Manager (General) has the most Assistant Manager posts (70), and Assistant Manager (Civil) is the only post with an SC backlog (2 posts). Candidates can check the detailed vacancies below.
Post Code
Post Name
UR
EWS
OBC
SC
ST
Total
PwBD
01
Assistant Manager (General)
28
07
23
09
03
70
03
02
Assistant Manager (Technical)
25
06
16
09
04
60
02
03
Assistant Manager (Finance)
05
01
03
–
01
10
02 (01 current + 01 backlog)
04
Assistant Manager (Engineering) – Civil
10
02
06
03 (01 current + 02 backlog)
01
22
02 (01 current + 01 backlog)
05
Assistant Manager (Engineering) – Electrical
03
–
01
01
–
05
01 (backlog)
06
Assistant Manager (Engineering) – Mechanical
03
–
01
–
–
04
–
Total
74
16
50
22
09
171
10
CWC Junior Executive Vacancy 2026
Both Junior Executive posts have 78 vacancies each, and both include 11 Ex-Servicemen posts.
Post Code
Post Name
UR
EWS
OBC
SC
ST
Total
PwBD
Ex-Servicemen
07
Junior Executive (General)
34
07
21
11
05
78
04 (03 current + 01 backlog)
11
08
Junior Executive (Technical)
32
07
26
07
06
78
05 (03 current + 02 backlog)
11
Total
66
14
47
18
11
156
09
22
What Is the Educational Qualification for CWC Recruitment 2026?
Assistant Manager (General) needs a two-year postgraduate degree or diploma & the Technical and Engineering posts need a B.Tech or B.E., and Junior Executive posts need graduation (any discipline, or a listed B.Sc. for Technical).
CWC Assistant Manager Educational Qualification
Post Code
Post Name
Educational Qualification
01
Assistant Manager (General)
Two-year Postgraduate Degree or Postgraduate Diploma in any discipline
02
Assistant Manager (Technical)
B.Tech OR B.E. in Agriculture / Food Technology / Food Science / Food Science and Technology / Food Technology Management / Biotechnology
03
Assistant Manager (Finance)
Graduate in Commerce with 3 years’ post-qualification experience in Finance & Accounting OR Graduate in any discipline with CA Intermediate / CMA Intermediate
04
Assistant Manager (Engineering) – Civil
B.E. OR B.Tech in Civil Engineering
05
Assistant Manager (Engineering) – Electrical
B.E. OR B.Tech in Electrical Engineering, or B.E. OR B.Tech in Electrical and Electronics Engineering
06
Assistant Manager (Engineering) – Mechanical
B.E. OR B.Tech in Mechanical Engineering
CWC Junior Executive Educational Qualification
Post Code
Post Name
Educational Qualification
07
Junior Executive (General)
Graduate in any discipline with working knowledge of computer applications, MS Office, etc.
08
Junior Executive (Technical)
B.Sc. in Agriculture / Botany / Zoology / Biotechnology / Microbiology / Biochemistry / Food Science / Chemistry with working knowledge of computer applications, MS Office, etc.
Important Notes: No work experience is required for any CWC post except Assistant Manager (Finance). Commerce graduates applying for Assistant Manager (Finance) need 3 years’ post-qualification experience in Finance & Accounting. Graduates with CA Intermediate or CMA Intermediate need no experience for this post.
What Is the Age Limit for CWC AM & JE Recruitment 2026?
The age limit is 18 to 28 years as on 15 November 2026. General candidates must be born between 16 November 1998 and 15 November 2008.
Particulars
Age Limit
Minimum Age
18 years
Maximum Age
28 years
Age Calculation Date
15 November 2026
CWC Age Relaxation
The following standard age relaxations are generally applicable to eligible categories, subject to the recruitment notification.
Category
Age Relaxation
Maximum Age
SC/ST
5 years
33 years
OBC (Non-Creamy Layer)
3 years
31 years
PwBD (UR / EWS)
10 years
38 years
PwBD (OBC)
13 years
41 years
PwBD (SC / ST)
15 years
43 years
Ex-Servicemen
As per Government of India rules
CWC Apply Online 2026 Link
The online application process for Assistant Manager & Junior Executive posts started on 17 October 2026 on the official CWC Career portal, and candidates can apply till the last date, 15 November 2026. Eligible candidates interested in the 327 Assistant Manager and Junior Executive posts can submit their application forms through the official CWC career portal or through the direct link to apply online given below.
CWC Application Fee 2026
UR, EWS, and OBC candidates pay ₹1,350 (₹850 application fee + ₹500 intimation charges), while SC, ST, PwBD, Ex-Servicemen, and all women candidates pay only ₹500. The fee includes GST and is non-refundable.
Category
Application Fee
Intimation Fee
Total
General / EWS / OBC
₹850
₹500
₹1,350
SC / ST / PwBD / Ex-Servicemen / Women
Nil
₹500
₹500
How to Apply Online for CWC Assistant Manager Recruitment 2026
Eligible candidates can apply online through the CWC recruitment portal. The application process is expected to begin on 17 October 2026 and close on 15 November 2026.
Follow these steps to complete the application:
Visit the official CWC recruitment portal.
Open the recruitment link for Advertisement No. CWC/I-Manpower/DR/Rectt/2026/01.
Register using the required personal and contact details.
Log in and fill in the application form.
Enter educational qualifications, work experience, and other required information.
Upload the photograph, signature, and other documents in the prescribed format.
Pay the applicable application fee through the available online payment method.
Review the form carefully before submitting it.
Download or print the submitted application form and payment receipt for future reference.
Documents Required for CWC Junior Executive Recruitment 2026
Before starting the application process, candidates should keep the following documents and details ready:
Recent passport-size photograph
Scanned signature
Left thumb impression
Handwritten declaration
Educational qualification certificates and marksheets
Date of birth proof
Valid email address and mobile number
Category certificate, if applicable
Experience certificate, where required
CA Intermediate or CMA Intermediate documents, where applicable
PwBD or ex-servicemen certificates, if applicable
Online payment details
What Is the CWC Selection Process 2026?
Assistant Managers are selected through an online exam, document verification, and interview (85% exam + 15% interview), while Junior Executives are selected on online exam marks and document verification only.
CWC Assistant Manager Selection Process
The selection process for Assistant Manager (Post Codes 01–06) is as follows
Stage
Details
Stage 1
Online exam (230 marks)
Stage 2
Document verification + Interview (30 marks), about 1:5 shortlisting
Final Merit
85% online exam + 15% interview
CWC Junior Executive Selection Process
Stage
Details
Stage 1
Online exam (230 marks)
Stage 2
Document verification, about 1:3 shortlisting
Final Merit
100% online exam
CWC Exam Pattern 2026
The CWC exam pattern consists of 202 questions for 230 marks in 3 hours. The detailed post-wise exam pattern is given below.
CWC Assistant Manager Exam Pattern 2026
Candidates can check the Assistant Manager Exam Pattern for various posts here.
Assistant Manager Exam Pattern for General Posts
Name of the Test
Questions
Marks
Medium
Time
Reasoning & Computer Aptitude
60
60
Hindi and English
50 minutes
English Language
40
40
English
25 minutes
Data Analysis & Interpretation and Quantitative Aptitude
60
60
Hindi and English
50 minutes
General Awareness
40
40
Hindi and English
25 minutes
Language & Comprehension Abilities – Descriptive Test
Data Analysis & Interpretation and Quantitative Aptitude
30
30
Hindi and English
25 minutes
Language & Comprehension Abilities – Descriptive Test
2
30
English
30 minutes
Total
202
230
3 hours
CWC Junior Executive Exam Pattern 2026
Candidates can check the CWC Junior Executive Exam Pattern for various posts here.
CWC Junior Executive Exam Pattern for Technical Post
Name of the Test
Questions
Marks
Medium
Time
Subject Knowledge
65
65
Hindi and English
55 minutes
Reasoning & Computer Aptitude
40
40
English
25 minutes
Data Analysis & Interpretation and Quantitative Aptitude
40
40
Hindi and English
30 minutes
General Awareness
20
20
Hindi and English
15 minutes
English Language
35
35
English
25 minutes
Language & Comprehension Abilities – Descriptive Test
2
30
English
30 minutes
Total
202
230
3 hours
Junior Executive Exam Pattern General Posts
Name of the Test
Questions
Marks
Medium
Time
Reasoning & Computer Aptitude
50
50
English
45 minutes
Data Analysis & Interpretation and Quantitative Aptitude
50
50
Hindi and English
45 minutes
General Awareness
50
50
Hindi and English
25 minutes
English Language
50
50
English
35 minutes
Language & Comprehension Abilities – Descriptive Test
2
30
English
30 minutes
Total
202
230
3 hours
CWC Service Bond 2026
Candidates should also review the service bond conditions before accepting an appointment under CWC Recruitment 2026.
Post Category
Bond Amount
Minimum Service Period
Assistant Manager
₹1,00,000
2 years
Junior Executive
₹50,000
2 years
Central Warehousing Corporation Salary 2026
The Central Warehousing Corporation provides different pay structures for Assistant Manager and Junior Executive positions. Along with the basic salary and Industrial Dearness Allowance (IDA), eligible employees are entitled to various additional allowances and benefits as per the corporation’s prevailing rules and regulations.
Post Name
Pay Scale
Grade
Assistant Manager (All Disciplines)
₹40,000–₹1,40,000
E-1
Junior Executive (General)
₹29,000–₹93,000
S-V
Junior Executive (Technical)
₹29,000–₹93,000
S-V
FAQS on CWC Recruitment 2026
1Q. How many vacancies are announced under CWC Recruitment 2026? Ans. CWC has announced a total of 327 vacancies, including 171 Assistant Manager posts and 156 Junior Executive posts.
2Q. What is the last date to apply for CWC Recruitment 2026? Ans. The last date to submit the CWC online application form is 15 November 2026, up to 11:59 PM.
3Q. What is the official website to apply for CWC Recruitment 2026? Ans. Candidates can apply through the official CWC recruitment portal at cwceportal.com/careers.
4Q. What is the age limit for CWC Recruitment 2026? Ans. The minimum age is 18 years, and the maximum age is 28 years as of 15 November 2026. Age relaxation is available for eligible reserved categories.
5Q. What is the educational qualification for CWC Assistant Manager posts? Ans. The qualification depends on the post. Assistant Manager (General) requires a two-year postgraduate degree or diploma, while Technical and Engineering posts require the prescribed B.E./B.Tech qualification. Assistant Manager (Finance) requires the specified Commerce or CA/CMA qualification.
6Q. Can B.Tech candidates apply for CWC Recruitment 2026? Ans. Yes. Candidates with B.E./B. Tech qualifications in the specified disciplines can apply for Assistant Manager Technical and Engineering posts, provided they meet the other eligibility conditions.
7Q. Can final-year students apply for CWC Recruitment 2026? Ans. No. Candidates must possess the required educational qualification by 15 November 2026. Students appearing in the final year or final semester are not eligible.
8Q. What is the application fee for CWC Recruitment 2026? Ans. General, EWS, and OBC candidates must pay ₹1,350. SC, ST, PwBD, Ex-Servicemen and women candidates must pay ₹500 as intimation charges.
9Q. What is the selection process for CWC Assistant Manager posts? Ans. The selection process includes an online examination, interview, and document verification. The final merit weightage is 85% for the online examination and 15% for the interview.
10Q. Is there an interview for CWC Junior Executive posts? Ans. No. Junior Executive candidates are selected through an online examination followed by document verification. There is no interview for these posts.
11Q. What is the total marks of the CWC online examination? Ans. The CWC online examination carries 230 marks and consists of 202 questions, including the descriptive test.
12Q. Is there negative marking in the CWC examination? Ans. Yes. One-fourth of the marks assigned to a question will be deducted for every incorrect answer in the objective tests. Unanswered questions do not carry any penalty.
13Q. What is the salary of CWC Assistant Manager and Junior Executive posts? Ans. Assistant Manager posts carry a pay scale of ₹40,000–₹1,40,000, while Junior Executive posts carry a pay scale of ₹29,000–₹93,000.
14Q. Can candidates apply for more than one post in CWC Recruitment 2026? Ans. Yes. Candidates can apply for more than one post if they meet the eligibility requirements. However, they must submit a separate application form and pay the applicable fee for each post.
15Q. What is the service bond amount for CWC Recruitment 2026? Ans. Selected Assistant Manager candidates must furnish a bond of ₹1 lakh for a minimum service period of two years. Junior Executive candidates must furnish a bond of ₹50,000 for the same period.
16Q. When will the CWC Recruitment 2026 examination be conducted? Ans. CWC has not announced the online examination date yet. Candidates should check the official website for the latest examination schedule.
17Q. When will the CWC admit card 2026 be released? Ans. According to the tentative schedule in the notification, the examination call letter will be available around 21 days before the examination. The exact release date has not been announced.
18Q. Is work experience required for CWC Junior Executive posts? Ans. No. The notification does not prescribe work experience for Junior Executive (General) or Junior Executive (Technical) posts. Candidates must meet the required educational qualifications and other conditions.
19Q. Can candidates apply for CWC Recruitment 2026 offline? Ans. No. Applications are accepted through the online mode only. Candidates must complete registration and fee payment through the official recruitment portal.
20Q. Is the CWC application fee refundable? Ans. No. The application fee and intimation charges are non-refundable, as mentioned in the official recruitment advertisement.
