Engineering Jobs   »   SSC JE 2024   »   SSC JE Syllabus 2024

SSC JE Syllabus 2024, Subject Wise Structure For Paper 1 and 2

The SSC JE Paper I was held in June, and SSC JE Paper II will take place soon. Candidates should now focus on preparing for the next exam. The SSC JE exam offers a great opportunity for engineering graduates to secure government jobs each year. To prepare well, it’s important to understand the full exam syllabus. This article offers a complete guide to the SSC JE Exam syllabus.

SSC JE Syllabus 2024

The SSC JE Paper I is complete, and Paper II will be held soon. The exam is usually of easy to moderate difficulty. Candidates who have studied the syllabus well have a good chance of scoring high, but competition is tough due to the limited number of positions. To prepare effectively, it’s important to review the exam pattern and subjects covered. Below is an overview of the subjects and exam mode for the SSC JE Exam.

Papers Type of Examination Subjects Mode of examination
Paper 1 Objective Multiple Choice (i) General Intelligence and Reasoning

(ii) General Awareness

(iii) Part-A General Engineering (Civil & Structural) or
Part-B General Engineering (Electrical) or
Part-C General Engineering (Mechanical)

CBT (Online)
Paper 2 Objective Multiple Choice Part-A General Engineering (Civil & Structural)
Part-B General Engineering (Electrical)
Part-C General Engineering (Mechanical)
CBT (Online)

SSC JE Exam Pattern 2024 For Paper 2

Candidates who pass the SSC JE 2024 Paper 1 cut-off will move on to take SSC JE Paper 2:

  • The SSC JE Paper 2 is a computer-based test.
  • Paper 2 will have questions only from the technical subject related to the candidate’s chosen educational qualification.
  • SSC JE 2024 Paper 2 is worth a total of 300 marks.
  • There is a negative marking of 1 mark for each incorrect answer in Paper 2 of the SSC JE 2024 exam.
SSC JE Paper 2 Exam Pattern 
Paper 2 Questions Marks Time
Part-A General Engineering (Civil & Structural) 100 300 2 Hrs.
OR
Part- B General Engineering (Electrical) 100 300 2 Hrs.
OR
Part-C General Engineering (Mechanical) 100 300 2 Hrs.

 

SSC JE Exam Pattern 2024 For Paper 1

The SSC JE 2024 Paper 1 is the primary phase of the examination cycle for the SSC JE 2024 test. The key highlights of the SSC JE Exam pattern 2024 are given below:

  • SSC JE Paper 1 has 3 sections i.e. general knowledge, general awareness, and general engineering for civil, electrical, and mechanical engineering having just objective questions.
  • The time of SSC JE paper 1 is 2 hours.
  • The candidates need to meet all requirements for the SSC JE paper 1 end to push ahead in the SSC JE 2024 selection process.
  • There is a negative marking of 0.25 marks in Paper 1 of the SSC JE 2024 exam.
SSC JE Paper 1 Exam Pattern
Papers No. Of Questions Maximum Marks Duration
General Intelligence & Reasoning 50 50 2 Hrs.
General Awareness 50 50
Part –A General Engineering (Civil & Structural) OR 100 100
Part-B General Engineering (Electrical) OR
Part-C General Engineering (Mechanical)
Total 200 200

SSC JE Paper 2 Syllabus 2024

In this section, we have examined the comprehensive SSC JE Paper 2, which will be in an objective format. Please review the SSC JE Syllabus for Civil Engineering, Mechanical Engineering, and Electrical Engineering provided below:

Civil Engineering Branch

The SSC JE Tier 2 exam for Civil Engineering covers lots of important topics. These include things like Building Materials, Estimating Costs, Surveying, Soil Mechanics, Hydraulics, Irrigation Engineering, Transportation Engineering, Environmental Engineering, Theory of Structures, Concrete Technology, RCC Design, and Steel Design. To do well in the Tier 2 exam, candidates need to understand these subjects well.

Building Materials: Physical and Chemical properties, classification, standard tests, use, and manufacture/quarrying of materials e.g. building stones, silicate-based materials, cement (Portland), asbestos products, timber, and wood-based products, laminates, bituminous materials, paints, varnishes.

Estimating, Costing, and Valuation: estimate, glossary of technical terms, analysis of rates, methods, and unit of measurement, Items of work – earthwork, Brick work (Modular & Traditional bricks), RCC work, Shuttering, Timber work, Painting, Flooring, Plastering. Boundary wall, Brick building, Water Tank, Septic tank, Bar bending schedule, Centre line method, Mid-section formula, Trapezoidal formula, Simpson’s rule. Cost estimate of Septic tank, flexible pavements, Tube well, isolates and combined footings, Steel Truss, Piles, and pile-caps. Valuation – Value and cost, scrap value, salvage value, assessed value, sinking fund, depreciation and obsolescence, methods of valuation.

Surveying: Principles of surveying, measurement of distance, chain surveying, working of the prismatic compass, compass traversing, bearings, local attraction, plane table surveying, theodolite traversing, adjustment of theodolite, Levelling, Definition of terms used in leveling, contouring, curvature, and refraction corrections, temporary and permanent adjustments of dumpy level, methods of contouring, use of a contour map, tech metric survey, curve setting, earthwork calculation, advanced surveying equipment.

Soil Mechanics: Origin of soil, phase diagram, Definitions-void ratio, porosity, degree of saturation, water content, the specific gravity of soil grains, unit weights, density index and interrelationship of different parameters, Grain size distribution curves, and their uses. Index properties of soils, Atterberg’s limits, ISI soil classification, and plasticity chart. Permeability of soil, coefficient of permeability, determination of coefficient of permeability, Unconfined and confined aquifers, effective stress, quick sand, consolidation of soils, Principles of consolidation, degree of consolidation, pre-consolidation pressure, normally consolidated soil, e-log p curve, computation of ultimate settlement. Shear strength of soils, direct shear test, Vane shear test, Triaxial test. Soil compaction, Laboratory compaction test, Maximum dry density, optimum moisture content, earth pressure theories, active and passive earth pressures, Bearing capacity of soils, plate load test, and standard penetration test.

Hydraulics: Fluid properties, hydrostatics, measurements of flow, Bernoulli’s theorem and its application, flow through pipes, flow in open channels, weirs, flumes, spillways, pumps, and turbines.

Irrigation Engineering: Definition, necessity, benefits, 2II effects of irrigation, types, and methods of irrigation, Hydrology – Measurement of rainfall, run off coefficient, rain gauge, losses from precipitation – evaporation, infiltration, etc. Water requirement of crops, duty, delta and base period, Kharif and Rabi Crops, Command area, Time factor, Crop ratio, Overlap allowance, Irrigation efficiencies. Different types of canals, types of canal irrigation, and loss of water in canals. Canal lining – types and advantages. Shallow and deep to wells, the yield from a well. Weir and barrage, Failure of weirs and permeable foundation, Slit, and Scour, Kennedy’s theory of critical velocity. Lacey’s theory of uniform flow. Definition of flood, causes, and effects, methods of flood control, water logging, preventive measures. Land reclamation, Characteristics affecting fertility of soils, purposes, methods, description of the land, and reclamation processes. Major irrigation projects in India.

Transportation Engineering: Highway Engineering – cross-sectional elements, geometric design, types of pavements, pavement materials – aggregates and bitumen, different tests, Design of flexible and rigid pavements – Water Bound Macadam (WBM) and Wet Mix Macadam (WMM), Gravel Road, Bituminous construction, Rigid pavement joint, pavement maintenance, Highway drainage, Railway Engineering- Components of the permanent way – sleepers, ballast, fixtures and fastening, track geometry, points and crossings, track junction, stations, and yards. Traffic Engineering – Different traffic survey, speed-flow-density, and their interrelationships, intersections, interchanges, traffic signals, traffic operation, traffic signs and markings, and road safety.

Environmental Engineering: Quality of water, source of water supply, purification of water, distribution of water, need of sanitation, sewerage systems, circular sewer, oval sewer, sewer appurtenances, sewage treatments. Surface water drainage. Solid waste management – types, effects, engineered management system. Air pollution – pollutants, causes, effects, control. Noise pollution – cause, health effects, control.

Theory of structures: Elasticity constants, types of beams – determinate and indeterminate, bending moment and shear force diagrams of simply supported, cantilever, and overhanging beams. Moment of area and moment of inertia for rectangular & circular sections, bending moment and shear stress for tee, channel, and compound sections, chimneys, dams and retaining walls, eccentric loads, slope deflection of simply supported and cantilever beams, critical load and columns, Torsion of circular section.

Concrete Technology: Properties, Advantages, and uses of concrete, cement aggregates, the importance of water quality, water-cement ratio, workability, mix design, storage, batching, mixing, placement, compaction, finishing, and curing of concrete, quality control of concrete, hot weather, and cold weather concreting, repair and maintenance of concrete structures.

RCC Design: RCC beams-flexural strength, shear strength, bond strength, design of singly reinforced and double reinforced beams, cantilever beams. T-beams, lintels. One-way and two-way slabs, isolated footings. Reinforced brickworks, columns, staircases, retaining walls, and water tanks (RCC design questions may be based on both Limit State and Working Stress methods).

Steel Design: Steel design and construction of steel columns, beams roof trusses plate girders.

Click Here-SSC JE Previous Year Question Papers

Electrical Engineering Branch

The SSC Junior Engineer Syllabus 2024 for Electrical Engineering is given below:

Basic concepts: Resistance, inductance, capacitance, and various factors affecting them. Concepts of current, voltage, power, energy, and their units.

Circuit law: Kirchhoff’s law, Simple Circuit solution using network theorems.

Magnetic Circuit: Concepts of flux, MMF, reluctance, Different kinds of magnetic materials, Magnetic calculations for conductors of different configurations e.g. straight, circular, solenoidal, etc. Electromagnetic induction, self, and mutual induction.

AC Fundamentals: Instantaneous, peak, R.M.S. and average values of alternating waves, Representation of sinusoidal wave form, simple series and parallel AC Circuits consisting of R.L. and C, Resonance, Tank Circuit. Poly Phase system – star and delta connection, 3 phase power, DC, and sinusoidal response of R-Land R-C circuit.

Measurement and measuring instruments: Measurement of power (1 phase and 3 phase, both active and re-active) and energy, 2 wattmeter method of 3 phase power measurement. Measurement of frequency and phase angle. Ammeter and voltmeter (both moving oil and moving iron type), an extension of range wattmeter, Multimeters, Megger, Energy meter AC Bridges. Use of CRO, Signal Generator, CT, PT, and their uses.  Earth Fault detection.

Electrical Machines: (a) D.C. Machine – Construction, Basic Principles of D.C. motors and generators, their characteristics, speed control, and starting of D.C. Motors. Method of braking motor, Losses, and efficiency of D.C. Machines. (b) 1-phase and 3-phase transformers – Construction, Principles of operation, equivalent circuit, voltage regulation, O.C., and S.C. Tests, Losses, and efficiency. Effect of voltage, frequency, and waveform on losses. Parallel operation of 1-phase/3 phase transformers. Auto transformers. (c) 3-phase induction motors, rotating magnetic field, the principle of operation, equivalent circuit, torque-speed characteristics, starting and speed control of 3-phase induction motors. Methods of braking, the effect of voltage and frequency variation on torque speed characteristics.

Fractional Kilowatt Motors and Single Phase Induction Motors: Characteristics and applications.

Synchronous Machines: Generation of 3-phase E.M.F. armature reaction, voltage regulation, parallel operation of two alternators, synchronizing, and control of active and reactive power. Starting and applications of synchronous motors.

Generation, Transmission, and Distribution: Different types of power stations, Load factor, diversity factor, demand factor, cost of generation, and interconnection of power stations. Power factor improvement, various types of tariffs, types of faults, and short circuit current for symmetrical faults. Switchgears – rating of circuit breakers, Principles of arc extinction by oil and air, H.R.C. Fuses, Protection against earth leakage / over current, etc. Buchholtz relay, Merz-Price system of protection of generators & transformers, protection of feeders and bus bars. Lightning arresters, various transmission and distribution systems, comparison of conductor materials, and the efficiency of a different system. Cable – Different types of cables, cable ratings, and derating factors.

Estimation and costing: Estimation of lighting scheme, electric installation of machines, and relevant IE rules. Earthing practices and IE Rules.

Utilization of Electrical Energy: Illumination, Electric heating, Electric welding, Electroplating, Electric drives, and motors.

Basic Electronics: Working of various electronic devices e.g. P N Junction diodes, Transistors (NPN and PNP type), BJT, and JFET. Simple circuits using these devices.

Life of Junior Engineer After Clearing SSC JE

Mechanical Engineering Branch

The SSC JE Syllabus 2024 for Mechanical Engineering is given below:

Theory of Machines and Machine Design: Concept of a simple machine, Four bar linkage and link motion, Flywheels and fluctuation of energy, Power transmission by belts – V-belts and Flat belts, Clutches – Plate and Conical clutch, Gears – Type of gears, gear profile and gear ratio calculation, Governors – Principles and classification, Riveted joint, Cams, Bearings, Friction in collars and pivots.

Engineering Mechanics and Strength of Materials: Equilibrium of Forces, Law of motion, Friction, Concepts of stress and strain, Elastic limit and elastic constants, Bending moments and shear force diagram, Stress in composite bars, Torsion of circular shafts, Bucking of columns – Euler’s and Rankin’s theories, Thin walled pressure vessels.

Properties of Pure Substances: p-v & P-T diagrams of pure substance like H2O, Introduction of steam table for steam generation process; definition of saturation, wet & superheated status. Definition of dryness fraction of steam, degree of superheat of steam. H-s chart of steam (Mollier’s Chart).

1st Law of Thermodynamics: Definition of stored energy & internal energy, 1st Law of Thermodynamics of cyclic process, Non-Flow Energy Equation, Flow Energy & Definition of Enthalpy, Conditions for Steady State Steady Flow; Steady State Steady Flow Energy Equation.

2nd Law of Thermodynamics: Definition of Sink, Source Reservoir of Heat, Heat Engine, Heat Pump & Refrigerator; Thermal Efficiency of Heat Engines & co-efficient of performance of Refrigerators, Kelvin – Planck & Clausius Statements of 2nd Law of Thermodynamics, Absolute or Thermodynamic Scale of temperature, Clausius Integral, Entropy, Entropy change calculation of ideal gas processes. Carnot Cycle & Carnot Efficiency, PMM-2; definition & its impossibility.

Air standard Cycles for IC engines: Otto cycle; plot on P-V, T-S Planes; Thermal Efficiency, Diesel Cycle; Plot on P-V, T-S planes; Thermal efficiency. IC Engine Performance, IC Engine Combustion, IC Engine Cooling & Lubrication.

Rankine cycle of steam: Simple Rankine cycle plot on P-V, T-S, h-s planes, Rankine cycle efficiency with & without pump work.

Boilers; Classification; Specification; Fittings & Accessories: Fire Tube & Water Tube Boilers.

Air Compressors & their cycles: Refrigeration cycles; Principle of a Refrigeration Plant; Nozzles & Steam Turbines

Properties & Classification of Fluid: ideal & real fluids, Newton’s law of viscosity, Newtonian and Non-Newtonian fluids, compressible and incompressible fluids.

Fluid Statics: Pressure at a point.

Measurement of Fluid Pressure: Manometers, U-tube, Inclined tube.

Fluid Kinematics: Stream line, laminar & turbulent flow, external & internal flow, continuity equation.

Dynamics of ideal fluids: Bernoulli’s equation, Total head; Velocity head; Pressure head; Application of Bernoulli’s equitation.

Measurement of Flow rate Basic Principles: Venturi Meter, Pilot tube, Orifice meter. Hydraulic Turbines: Classifications, Principles.

Centrifugal Pumps: Classifications, Principles, Performance. Production Engineering

Classification of Steels: mild steel & alloy steel, Heat treatment of steel, Welding – Arc Welding, Gas Welding, Resistance Welding, Special Welding Techniques i.e. TIG, MIG, etc. (Brazing & Soldering), Welding Defects & Testing; NDT, Foundry & Casting – methods, defects, different casting processes, Forging, Extrusion, etc, Metal cutting principles, cutting tools, Basic Principles of machining with (i) Lathe (ii) Milling (iii) Drilling (iv) Shaping (v) Grinding, Machines, tools & manufacturing processes.

 

SSC JE Paper 1 Syllabus 2024

The syllabus for Paper 1 of the SSC JE exam in 2024 includes three main sections: General Intelligence & Reasoning, General Awareness, and General Engineering (Civil & Structural, Electrical, and Mechanical). In the General Intelligence & Reasoning section, candidates can expect topics such as classification, analogy, coding-decoding, and more.

Section Topics
General Intelligence & Reasoning
  • Classification
  • Analogy
  • Coding-Decoding
  • Paper Folding Method
  • Matrix
  • Word Formation
  • Venn Diagram
  • Direction and Distance
  • Blood Relations
  • Series
  • Verbal Reasoning
  • Non-Verbal Reasoning
  • Seating arrangements
  • Space Visualization
  • Problem-Solving Analysis
  • Judgment
  • Decision Making
  • Visual Memory
  • Discrimination
  • Observation
  • Relationship Concept
  • Arithmetical Reasoning
  • Verbal and Figure Classification
  • Arithmetical Number Series
  • Arithmetical Computations
General Knowledge
  • Static General Knowledge
  • Science
  • Current Affairs
  • Sports
  • Books and Authors
  • Important Schemes
  • Prominent Personalities in the News
  • History
  • Culture
  • Geography
  • Economic
  • Awards and Honors
Mechanical Engineering
  • Theory of Machines and Machine Design
  • Engineering Mechanics and Strength of Materials
  • Properties of Pure Substances
  • 1st Law of Thermodynamics, 2nd Law of Thermodynamics
  • Air Standard cycles for IC Engines
  • IC Engine Performance
  • IC Engines Combustion
  • IC Engine Cooling & Lubrication
  • Rankine cycle of System
  • Boilers, Classification, Specification
  • Fitting & Accessories
  • Air Compressors & their cycles
  • Refrigeration cycles
  • Principle of Refrigeration Plant
  • Nozzles & Steam Turbines
  • Properties & Classification of Fluids
  • Fluid Statics
  • Measurement of Fluid Pressure
  • Fluid kinematics
  • Dynamics of Ideal Fluids
  • Measurement of Flow rate
  • basic principles
  • Hydraulic Turbines
  • Centrifugal Pumps
  • Classification of steel.
Electrical Engineering
  • Basic concepts
  • Circuit law
  • AC Fundamentals
  • Magnetic Circuit
  • Electrical Machines
  • Utilization and Electrical Energy
  • Transmission and Distribution
  • Estimation and Costing
  • Basic Electronics
  • Generation
  • Fractional Kilowatt Motors and single-phase induction Motors
  • Measurement and Measuring instruments
  • Synchronous Machines
Civil Engineering
  • Building Materials
  • Estimating, Costing, and Valuation
  • Surveying
  • Soil Mechanics
  • Hydraulics
  • Irrigation Engineering
  • Transportation Engineering
  • Environmental Engineering
  • Structural Engineering: Theory of Structures, Concrete Technology, RCC Design, Steel Design

Detailed SSC JE Syllabus PDF

The Staff Selection Commission (SSC) has announced the SSC JE 2024 Examination on 5, 6, and 7 June 2024. Aspiring candidates gearing up for the SSC JE Exam 2024 are advised to align their preparation with the official SSC JE Syllabus PDF, which will be released by the recruiting authority on its official website. The detailed Syllabus PDF for SSC JE 2024 is provided below to facilitate candidates in their preparation

Click here to download the SSC JE Syllabus 2024 PDF  

How to Prepare for the SSC JE Tier II Syllabus?

Understanding the vast and detailed syllabus of SSC JE Tier II and the depth of questions asked from the technical subject, it’s imperative for candidates to devise the right approach to cover the entire syllabus of SSC JE Tier II and crack the final nail in the coffin to secure the final selection. Here we have devised some methods to crack the SSC JE Tier II Syllabus.

  • Go through the entire syllabus. A lookout at each portion of the syllabus is important. It will ensure that a candidate doesn’t miss out on anything when understanding the syllabus is concerned.
  • Candidates can get help from the teachers who will summarize the syllabus, decreasing the amount of load and burden a candidate might get after knowing the detailed syllabus of SSC JE Tier II.
  • Focus more on clearing all the concepts involved in the technical subject and candidates can keep aside the study of other non-technical subjects for some time.
  • Candidates should check the level of questions that are asked on a particular topic. Candidates can get the idea by viewing the last year’s question papers.

 

Related Articles
 SSC JE 2024 SSC JE Eligibility Criteria 2024
SSC JE Result 2024 SSC JE Score Card 2024
SSC JE Cut-Off 2024 SSC JE Preparation Strategy 2024
SSC JE Admit Card 2024 SSC JE Exam Date 2024
SSC JE Application Status 2024 SSC JE Electrical Syllabus 2024
SSC JE Previous Year Question Papers SSC JE Salary 2024
SSC JE Post Preference Order SSC JE Civil Syllabus 2024
SSC JE Mechanical Syllabus 2024 SSC JE Online Coaching
SSC JE Mock Test

 

Latest Posts

 

Sharing is caring!

FAQs

Where can I find a detailed SSC JE Syllabus 2024?

This article covers all details of SSC JE Syllabus 2024. Go through this article to get all information about the syllabus.

Is there any interview in SSC JE Exam 2024?

No, there is no interview in SSC JE Exam 2024. Candidates will be selected solely on the basis of the scores obtained in the Paper I and Paper II examination.

Is there any change in SSC JE Exam pattern?

Yes, both papers will be computer-based objective type tests, according to the SSC JE New Exam Pattern.

What is the Syllabus For SSC JE Paper 1?

Paper 1 generally covers topics such as General Intelligence and Reasoning, General Awareness, and General Engineering (Civil/Mechanical/Electrical). The SSC JE Syllabus for Paper 1 may vary slightly depending on the specific discipline for which you are applying.

What is the Syllabus For SSC JE Paper 2?

Paper 2 is an objective type paper that evaluates candidates' technical knowledge and understanding of the engineering discipline they have applied for (Civil/Mechanical/Electrical). It usually includes questions related to the core concepts and applications in the respective field.

Is there a negative marking in the SSC JE exam?

Yes, there is a provision for negative marking of 1/3 marks in the SSC JE exam.

What is the duration of the SSC JE exam?

The duration of the SSC JE exam may vary. In general, Paper 1 is conducted for a duration of 2 hours, while Paper 2 is conducted for 2 hours as well.

Is there any negative marking in SSC JE Tier 2 Exam?

Yes, there is negative marking of 0.33 marks in SSC JE Tier 2 Exam.

Is SSC JE exam hard?

SSC JE exam is generally considered very competitive. However, the level of the paper is easy to moderate.

What is the difference between SSC CGL and SSC JE exam?

SSC CGL exam is conducted for various non-technical posts in the government organizations such while SSC JE exam is conducted for technical posts in various government organizations. Any graduate is eligible for SSC CGL. Only selected streams of engineering such as Mechanical, Civil and Electrical are eligible for the SSC JE exam.

TOPICS: