gate quiz
-
Quiz: Civil Engineering 1 July 2021
Quiz: Civil EngineeringExam: GATETopic: Miscellaneous Each question carries 1 markNegative marking: 1/3 markTime: 20 Minutes Q1. If principal stresses in a two-dimensional case are -20 MPa and 30 MPa respectively, then maximum shear stress at the point is(a) 10 MPa(b)...
Published On July 1st, 2021 -
Quiz: Civil Engineering 17 June 2021
Quiz: Civil EngineeringExam: GATETopic: Miscellaneous Each question carries 1 markNegative marking: 1/3 markTime: 20 Minutes Q1. The thickness of the laminar boundary layer on a flat plate at a point X is 20 mm and at a point Y downstream...
Published On June 17th, 2021 -
Quiz: Civil Engineering 7 June 2021
Quiz: Civil EngineeringExam: GATETopic: Miscellaneous Each question carries 1 markNegative marking: 1/3 markTime: 20 Minutes Q1. The distance between the points measured along a slope is 428 m. if the difference in level is 62 m, then the horizontal distance...
Published On June 7th, 2021 -
Quiz: Civil Engineering 17 May 2021
Quiz: Civil EngineeringExam: GATETopic: Miscellaneous Each question carries 1 markNegative marking: 1/3 markTime: 20 Minutes Q1. A clay layer of thickness 10 cm and initial void ratio 0.5 undergoes settlement that final void ratio is 0.2, the settlement of the...
Published On May 17th, 2021 -
Quiz: Mechanical Engineering 12th May
Quiz: Mechanical EngineeringExam: GATETopic: Miscellaneous Each question carries 2 markNegative marking: 1/3 markTime: 20 Minutes Q1. A two phase liquid vapour mixture of a pure substance has a pressure of 120 bar and occupies 0.3 m^3. If the mass of...
Published On May 12th, 2021 -
Quiz: Civil Engineering 26 April 2021
Quiz: Civil EngineeringExam: GATETopic: Miscellaneous Each question carries 1 markNegative marking: 1/3 markTime: 30 Minutes Q1. The bending moments at point A, B and C of the beam shown in the given figure will be (a) 10 kNm, 10 kNm...
Published On April 26th, 2021
