Correct option is E
To determine the load performance of a DC shunt generator, you need both a voltmeter and an ammeter to measure the voltage and current, respectively, across the load, allowing you to calculate the power output.
To determine the load performance of a DC shunt generator, you need both a voltmeter and an ammeter to measure the voltage and current, respectively, across the load, allowing you to calculate the power output.
Fill in the blank with the CORRECT option:
________is the effect of magnetic flux setup by armature current upon the distribution of flux under the main poles.
In a DC machine, the yoke is the outer frame of cast steel where several pole cores are bolted. Which of the following statement(s) is/are TRUE regarding the purpose served by the yoke?
Statement 1 It supports the pole cores
Statement 2- It increases the cross-sectional area of the magnetic circuit
For supplying a large DC load, it is desirable to use more than one generator in parallel which assures that if one stops working other(s) can take up the load. Which of the following option(s) is/are CORRECT regarding the advantage involved in performing the above-said procedure?
A. Larger efficiency
B. Continuity of services
C. Decreased stability
Which of the following options is termed as the winding that handles only exciting current?
In a DC generator, what principle is used to determine the direction of the induced EMF?
A 20 kW, 200 V d.c. generator has a constant loss of 500 W and a variable loss of 400 W at half load.
What is the total loss at full load?
A 250V,10 kW DC shunt generator has an armature resistance of 0.2Ω. The shunt field resistance is 100Ω. What is the induced EMF at full load?
Fill in the blank with the CORRECT option:
________is the effect of magnetic flux setup by armature current upon the distribution of flux under the main poles.
In a DC machine, the yoke is the outer frame of cast steel where several pole cores are bolted. Which of the following statement(s) is/are TRUE regarding the purpose served by the yoke?
Statement 1 It supports the pole cores
Statement 2- It increases the cross-sectional area of the magnetic circuit
For supplying a large DC load, it is desirable to use more than one generator in parallel which assures that if one stops working other(s) can take up the load. Which of the following option(s) is/are CORRECT regarding the advantage involved in performing the above-said procedure?
A. Larger efficiency
B. Continuity of services
C. Decreased stability
Which of the following options is termed as the winding that handles only exciting current?
In a DC generator, what principle is used to determine the direction of the induced EMF?
A 20 kW, 200 V d.c. generator has a constant loss of 500 W and a variable loss of 400 W at half load.
What is the total loss at full load?
A 250V,10 kW DC shunt generator has an armature resistance of 0.2Ω. The shunt field resistance is 100Ω. What is the induced EMF at full load?