Correct option is D
Given:∙ Transformer rating=200kVA∙ HV side voltage=20kV=20,000V∙ Percentage impedance=4%Substituting the values:Vsc=1004×20,000Vsc=0.04×20,000Vsc=800V
The percentage impedance of a 200 kVA, 20 kV/200 V, 50 Hz transformer is 4%. Calculate the applied voltage on the high voltage side.
Eddy currents are induced by changing magnetic fields. Where do they flow with respect to the magnetic field?
Match the transformer parts with their functions.
Transformer | Functions | ||
I. | Conservator | a) | Insulating device |
II. | Breather | b) | Regulates the temperature |
III. | Radiator | c) | Oil Reservoir |
IV. | Bushings | d) | Cools the oil in the transformer |
Which of the following options depict the advantages of using a three-phase unit transformer over three single-phase transformers?
Fill in the blank(s) with the most appropriate option.
The major function of a is to isolate low and high-power circuits.
In this type of transformer, rectangular frame laminations are formed to build the interior of the transformer which are cut in L-shape strips to avoid high reluctance at joints. Determine the type of transformer mentioned here.
The pulse generator is one among many special-purpose signal generators. Which of the following statement(s) is/are CORRECT concerning the same?
A. Produce output waveforms of sine square or triangular
B. They act as stimuli for circuits
C. Primarily used for testing purposes
D. Generate repetitive waveforms
The percentage impedance of a 200 kVA, 20 kV/200 V, 50 Hz transformer is 4%. Calculate the applied voltage on the high voltage side.
Fill in the blanks with an appropriate choice from the options given below.
The vertical position on which the coil is wound in a transformer is called________
Calculate the amount of total power transferred conductively for a 49 kVA transformer with a transformation ratio of 0.7.
In which of the following cases, one CANNOT make use of auto transformers?
Eddy currents are induced by changing magnetic fields. Where do they flow with respect to the magnetic field?
Match the transformer parts with their functions.
Transformer | Functions | ||
I. | Conservator | a) | Insulating device |
II. | Breather | b) | Regulates the temperature |
III. | Radiator | c) | Oil Reservoir |
IV. | Bushings | d) | Cools the oil in the transformer |
Which of the following options depict the advantages of using a three-phase unit transformer over three single-phase transformers?
Fill in the blank(s) with the most appropriate option.
The major function of a is to isolate low and high-power circuits.
In this type of transformer, rectangular frame laminations are formed to build the interior of the transformer which are cut in L-shape strips to avoid high reluctance at joints. Determine the type of transformer mentioned here.
The pulse generator is one among many special-purpose signal generators. Which of the following statement(s) is/are CORRECT concerning the same?
A. Produce output waveforms of sine square or triangular
B. They act as stimuli for circuits
C. Primarily used for testing purposes
D. Generate repetitive waveforms
The percentage impedance of a 200 kVA, 20 kV/200 V, 50 Hz transformer is 4%. Calculate the applied voltage on the high voltage side.
Fill in the blanks with an appropriate choice from the options given below.
The vertical position on which the coil is wound in a transformer is called________
Calculate the amount of total power transferred conductively for a 49 kVA transformer with a transformation ratio of 0.7.
In which of the following cases, one CANNOT make use of auto transformers?