Home   »   UPSC Engineering Services Mains Exam Date...

UPSC Engineering Services Mains Exam Date 2020: Check Revised Exam Dates

UPSC Engineering Services Mains Exam Date 2020: UPSC has revised the mains exam dates of UPSC Engineering Services Mains exam on its official website @upsc.gov.in. Candidates can check the revised mains date in the image below. The mains exam was scheduled to held of 09th August 2020 which was deferred because of COVID-19 situation. The mains exam is now going to held on 18th October, 2020. Check the UPSC IES Mains exam date image below.

Update: UPSC IES Main 2020 exam date has been revised. The exam will be conducted on October 18, 2020. Previously the exam was scheduled to be conducted on August 09, 2020.

UPSC Engineering Services Mains Exam Date 2020: Check Revised Exam Dates_40.1

UPSC Engineering Services Mains Exam Date

Union Public Service Commission has revised the mains exam date for UPSC Engineering Services Recruitment Notification 2020. UPSC Engineering Services Recruitment mains will be held for 495 posts of Civil, Mechanical, Electrical and Electronic and Telecommunication Engineering. Candidates who has cleared the Prelims exam can check the revised mains dates. Start revision for the exam, as these dates may not deferred now.

UPSC Engineering Services Recruitment Notification 2020

UPSC Engineering Services Recruitment 2020: Important Dates

EVENTS DATE
Application Start Date 25th September 2019
Application Last Date 15th October 2019
Fee Payment Last Date 15th October 2019
Admit Card December 2019.
Preliminary Exam Date 05th January 2020
Mains Exam Date 18th October 2020
Mains Result Date To be notified later

UPSC Engineering Services Recruitment 2020: Eligibility Criteria

The Eligibility Criteria for UPSC Engineering Services Recruitment 2020 are as follows:

  1. Age Limit:-  The minimum age of the candidates should be 21 years while the maximum age the candidate should not exceed 30 years ( 35 years in case of SC/ST) for the post of UPSRTC Bus Conductor.
  2. Education Qualification:- For admission to the examination, a candidate must have –
    (a) obtained a degree in Engineering from a University incorporated by an Act of the Central or State Legislature in India or other Educational Institutions established by an Act of Parliament or declared to be deemed as Universities under Section 3 of the University Grants Commission Act, 1956; or
    (b) passed Sections A and B of the Institution Examinations of the Institution of Engineers (India); or
    (c) obtained a degree/diploma in Engineering from such foreign University/College/Institution and under such
    conditions as may be recognized by the Government for the purpose from time to time, or
    (d) passed Graduate Membership Examination of the Institution of Electronics and Telecommunication Engineers (India); or
    (e) passed Associate Membership Examination Parts II and III/Sections A and B of the Aeronautical Society of India; or
    (f) passed Graduate Membership Examination of the Institution of Electronics and Radio Engineers, London held after November, 1959
    Provided that a candidate for the post of Indian Naval Armament Service (Electronics Engineering Posts) and Indian Radio Regulatory Service Group ‘A’ may possess any of the above qualifications or the qualification mentioned below namely:‐
    For Indian Naval Armament Service (Electronics Engg. Posts) ‐ M.Sc. degree or its equivalent with Wireless
    Communication Electronics, Radio Physics or Radio Engineering as a special subject.
    For Indian Radio Regulatory Service Group ‘A’– M.Sc. degree or its equivalent with Wireless Communication Electronics, Radio Physics or Radio Engineering as a subject or Master’s Degree in Science with Physics and Radio Communication or Electronics or Telecommunication as a special subject.
  3. Examination Fee: 200 for General/OBC all others are exempted from fee.

UPSC Engineering Services Notification 2020: Exam Pattern

The UPSC Engineering Services Exam Pattern is given below in the table:

Stage Mode Duration Marks
 Stage 1/ Preliminary Examination Offine 5 hours 600
Stage 2/ Professional Examination Offline 6 hours 600
Personal Interview Person to person No Specified time 200

UPSC Engineering Services Notification 2020: Stage 1 Exam

This stage of UPSC Engineering Services 2020 Examination is Qualifying and Scoring in nature. Six to Seven times of the number of vacancies will be called for next stage. Marks of stage 1 will included in final meritUPSC Engineering Services 2020 Stage 1 Examination is scheduled to be held on 05th January 2020.

Section Name Duration of Exam Maximum Marks
Paper 1 (General Studies and Engineering Aptitude) 2 hours 300
Paper 2 (Engineering Discipline of Civil/Mechnical/Electrical/ Electronics and Telecommunication) 3 hours 300
Total 5 hours 600

Note: There is a Negative marking of 1/3 marks assigned to that question.

UPSC Engineering Services Notification 2020: Stage 2 Exam

Stage 2 of UPSC Engineering Services 2020 Examination is Qualifying and Scoring in nature. Two times of the number of vacancies will be called for Personal Interview. Marks of stage 2 will included in final merit. UPSC Engineering Services 2020 Stage 2 Examination dates are not declared yet.

Section Name Duration of Exam Maximum Marks
Paper 1 (Engineering Discipline of Civil/Mechnical/Electrical/ Electronics and Telecommunication) 3 hours 300
Paper 2 (Engineering Discipline of Civil/Mechnical/Electrical/ Electronics and Telecommunication) 3 hours 300
Total 6 hours 600

Note: There is a Negative marking of 1/3 marks assigned to that question.

UPSC Engineering Services Online Application Form 2020

The UPSC Engineering Services Application form 2020 is available from 25th September to 15th October 2019 to be completed in all respects.
Requirements of UPSC Engineering Services Application Form 2020:

  • Matriculation Certificate/Marksheet
  • Age Proof/Birth Certificate
  • Education Certificate.
  • Caste Certificate
  • Challan/Credit Certificate/E Challan
  • Photograph
  • Signature

The UPSC Engineering Services Application form 2020 link is available below. Follow the given instructions for completing the form.

UPSC Engineering Services Application form 2020 Link

Click Here to Apply Online for UPSC Engineering Services Recruitment 2020

Steps for submitting UPSC Engineering Services Online Application Form:

  1. Click the above link for UPSC Engineering Services Online Application Form
  2. As the new tab opens, Click the option, “Click here for Part I registration”
  3. On the next page, Check for the declaration at the bottom of the page, “Yes, I Agree”
  4. Fill the Personal Details
  5. Finally Agree for declaration and Submit the Part I of UPSC Engineering Services Online Application Form
  6. Go to Part II of the form and make Payment details (except for fee exempted candidates), selection of examination centre, uploading of Photograph, Signature, Photo Identity Card Document and Declaration
  7. Verify all the credentials and then Click Submit

Note to the candidates for submitting UPSC Engineering Services Online Application Form:

  1. The UPSC Engineering Services Online Application Form must be completed in all aspects.
  2. Verify all the details after submitting or uploading the related credentials.
  3. On successful completion of your complete application, an auto-generated email message will be sent on your registered email-id.
  4. In case email is not received by you please check / ensure that submission of Part-II of the Application has been made by you
  5. Payment is compulsory for all the candidates except for the exempted candidates. Without payment, the application is considered invalid.

UPSC Engineering Services Notification 2020: Personal Interview

The Personal Interview of UPSC Engineering Services 2020 Examination is Qualifying and Scoring in nature. It is the last stage of UPSC Engineering Services 2020. It consists of total 200 marks.
This stage will test the skills in the following fields:

  • Suitability of candidate for a career in public service sector
  • Mental caliber or Mental alertness
  • Leadership Qualities
  • Initiative & Intellectual Curiosity,
  • Mental & Physical energy and
  • Other social traits and interest in current affairs

Note:-  Final merit of UPSC Engineering Services Examination will be made on the bases of makes obtained by candidates in Stage 1, Stage 2 and Personal Interview.
Stay updated for upcoming notifications on UPSC Engineering Services Application Form or Recruitment 2020.

Click here to Check UPSC Engineering Services Syllabus

Click here to check more Government Jobs 2019

Sharing is caring!

Congratulations!

Download Upcoming Government Exam Calendar 2021

Download your free content now!

We have already received your details.

Please click download to receive Adda247's premium content on your email ID

Incorrect details? Fill the form again here

Download Upcoming Government Exam Calendar 2021

Thank You, Your details have been submitted we will get back to you.
Was this page helpful?

Leave a comment

Your email address will not be published. Required fields are marked *