SSC JE ELECTRICAL QUIZ

  • Quiz: Electrical Engineering 22 Mar 2021

    Quiz: Electrical EngineeringExam: SSC JETopic: Miscellaneous Each question carries 1 mark.Negative marking: 1/4 markTime: 10 Minute Q1. The primary and secondary windings of a transformer are wound on the top of each other in order to reduce….(a) Iron losses(b) Copper...

    Published On March 22nd, 2021
  • Quiz: Electrical Engineering 17 Mar 2021

    Quiz: Electrical EngineeringExam: SSC JETopic: Miscellaneous Each question carries 1 mark.Negative marking: 1/4 markTime: 10 Minute Q1. Negative voltage regulation is indicative that the load is(a) Inductive(b) Capacitive(c) Inductive or Resistive(d) None of the above Q2. A field excitation of...

    Published On March 17th, 2021
  • Quiz: Electrical Engineering 13 Mar 2021

    Quiz: Electrical EngineeringExam: SSC JETopic: Miscellaneous Each question carries 1 mark.Negative marking: 1/4 markTime: 10 Minute Q1. The secondary coil of an ideal 2:1 transformer has a 2 F capacitor connected across its terminals. The referred impedance on the primary...

    Published On March 13th, 2021
  • Quiz: Electrical Engineering 04 Mar 2021

    Q3. Maximum permissible earth resistance for building is(a) 0.5 Ω(b) 1 Ω(c) 2 Ω(d) 8 Ω Q4. Reciprocal of admittance is(a) Resistance(b) Inductive reactance(c) Capacitive reactance(d) Impedance Q5. The form factor of sinusoidal alternating current is ….(a) 1(b) 0(c) 1.11(d)...

    Published On March 4th, 2021
  • Quiz: Electrical Engineering 01 Mar 2021

    Quiz: Electrical EngineeringExam: SSC JETopic: Miscellaneous Each question carries 1 mark.Negative marking: 1/4 markTime: 10 Minute Q1. In a synchronous motor, if β is the impedance angle and ? is torque angle, then the maximum developed mechanical power is obtained...

    Published On March 1st, 2021
  • Quiz: Electrical Engineering 27 Feb 2021

    Quiz: Electrical EngineeringExam: SSC JETopic: Miscellaneous Each question carries 1 mark.Negative marking: 1/4 markTime: 10 Minute Q1. In the equivalent circuit of an induction motor, the mechanical load is represented by(where r is actual rotor resistance, (s)=slip)(a) r_2/s(b) r_2 s/((1-s))(c)...

    Published On February 27th, 2021
  • Quiz: Electrical Engineering 06 Jan 2021

    Quiz: Electrical EngineeringExam: SSC-JETopic: Miscellaneous Each question carries 1 mark.Negative marking: 1/4 markTime: 10 Minute Q1. The SI unit of conductivity is:(a) Ohm/meter(b) Ohm-meter(c) Siemens/meter(d) Siemens – meter Q2. The SI unit of conductance is:(a) Coulomb(b) Ohm(c) Siemens(d) Newton Q3....

    Published On January 6th, 2021
  • Quiz: Electrical Engineering 31 Dec 2020

    Quiz: Electrical EngineeringExam: SSC-JETopic: Miscellaneous Each question carries 1 mark.Negative marking: 1/4 markTime: 10 Minute Q1. An ac source is applied to pure inductive circuit. What is active power consumed by the circuit?(a) Zero(b) V^2/X_L(c) VI(d) 1/2 LI^2 Q2. The...

    Published On December 31st, 2020
  • Quiz: Electrical Engineering 28 Dec 2020

    Quiz: Electrical EngineeringExam: SSC-JETopic: Miscellaneous Each question carries 1 mark.Negative marking: 1/4 markTime: 10 Minute Q1. A 440 V ,3-phase, 10 pole and 50 Hz synchronous motor delivering a torque of 50/π Nm, delivers a power of(a)500 W(b)1000 W(c)50 W(d)2000...

    Published On December 28th, 2020
  • Quiz: Electrical Engineering 23 Dec 2020

    Quiz: Electrical EngineeringExam: SSC JETopic: Miscellaneous Each question carries 1 mark.Negative marking: 1/3 markTime: 10 Minute Q1. A 4 A source has a shunt internal resistance of 45 Ω. The maximum power that can be delivered to a load is(a)...

    Published On December 23rd, 2020