Engineering Jobs   »   Civil Engineering Quiz

# SSC-JE’21 CE: Daily Practices Quiz. 14-July-2021

Quiz: Civil Engineering
Exam: SSC-JE
Topic: Miscellaneous

Each question carries 1 mark
Negative marking: 1/4 mark
Time: 8 Minutes

Q1. Calculate detention time of the tank whose breadth is 2 m, length is 4 m and depth is 2.5m. the rate of flow is 4 x 10³ liters per hour
(a) 5 hours
(b) 4 hours
(c) 5.5 hours
(d) 2.5 hours

Q2. The detachment of the paint film from the surface is known as____________.
(a) Chalking
(b) Cracking
(c) Flaking
(d) Wrinkling

Q3. What will be the thermal stress developed in a rod having a diameter of 4 cm and length of 2m. it experiences heating from temperature 50°C to 200°C. the coefficient of thermal expansion is:
α=10×10^(-6) \/°C and young modulus is 250 GPa
(a) 300
(b) 325
(c) 350
(d) 375

Q4. The scale in which three successive dimensions can be measure at a time is called ___________.
(a) Chord scale
(b) Diagonal scale
(c) Plain scale
(d) Vernier scales

Q5. When not specified, the volume of steel in R.C.C work is taken as:
(a) 1% to 1.6% of R.C.C. volume
(b) 2% to 4% of R.C.C. volume
(c) 4% to 6% of R.C.C. volume
(d) 0.6% to 1% of R.C.C. volume

Q6. Enoscope is used to determine
(a) Spot speed
(b) Average speed
(c) Travel time
(d) None of these

Solutions

S1. Ans.(a)
Sol. Given,
Length (L) = 4m.
Breadth (B) = 2 m.
Depth (D) = 2.5 m.
Discharge (Q) = 4 × 10³ l/hour
Detention time of tank (t_d) =?
t_d = (Volume of tank (V))/(Discharge (Q) )
= (4×2×2.5 (m^3 ))/(4×10^3×10^(-3) (m^3 \/hour) )
= 5 hours.

S2. Ans.(c)
Sol. There are same defect in paint surface
(a) Flaking → It is detachment of paint film from surface.
(b) Chalking → Paintfill becomes powder due to insufficient oil.
(c) Blistering → Formation of bubble on the surface of paints.
(d) Cracking → Formation of crack on painted surface.

S3. Ans.(d)
Sol. Thermal stress in rod
σ_thermal=α∆TE
=10×10^(-6)×(200-50)×250×10^9
=375 MPa

S4. Ans.(b)
Sol. Diagonal scale → In this scale three successive dimension can be measured at a time like meter, decimeter and centimeter. In this case only units, tenths and hundredths can be shown.
Plane scale → In this scale two successive dimension can be measure at a time. Like meter and decimeter.

S5. Ans.(d)
Sol. The volume of steel in R.C.C. Works is taken as 0.6 to 1% of R.C.C volume (when not specified).

S6. Ans.(a)
Sol. Enoscope or mirror box method is used to determine spot speed.

Sharing is caring!

Thank You, Your details have been submitted we will get back to you.