**Quiz: Civil EngineeringExam: UPPCL-JETopic: Miscellaneous**

**Each question carries 1 markNegative marking: 1/4 markTime: 10 Minutes**

Q1. The most effective farming method for returning minerals to the soil is

(a) Contour ploughing

(b) Teracing

(c) Crop rotation

(d) Furrowing

Q2. The relationship between air content of soil (a_c) and its degree of saturation (S_r) is expressed as

(a) a_c=1+S_r

(b) a_c=S_r-1

(c) a_c=1-S_r

(d) None of these

Q3. The process of applying cement mortar under pressure through a nozzle is called:

(a) Pressurizing

(b) Prestressing

(c) Guniting

(d)Screeding

Q4. The allowable stress in a long column can be increased by increasing the

(a) radius of gyration

(b) eccentricity

(c) slenderness ration

(d) length of the column

Q5. A type of valve which provided at the corner of roads to control the flow of water at the cross section of the distribution system is called?

(a) Safety valve

(b) Scour valve

(c) Sluice valve

(d) check valve

Q6. In the coefficient of passive earth pressure is 1/3 then the coefficient of active earth pressure is:

(a) 1/3

(b) 1

(c) 3/2

(d) 3

Q7. A two-dimensional flow field is given by stream function Ψ = x² – y². The magnitude of absolute velocity at a point (1,1)

(a) 2

(b) 4

(c) 8

(d) 2√2

Q8. The activity of batching in production of concrete refers to:

(a) Weighing of all ingredients within the acceptable tolerances for all batches

(b) Weighing of all ingredients

(c) Most accurate weighing of cement & water that influence strength of concrete

(d)Measuring the workability of concrete

Q9. Which one of the following expression gives intermediate sight distance as per I.R.C. standards? (SSD: Stopping sight distance; OSD: Overtaking sight distance)

(a) 2OSD

(b) ((SSD+OSD))/2

(c) 2SSD

(d) ((OSD-SSD)/2)

Q10. Find the plinth area of building if a building has built up area of 250 m.² with a courtyard of 5 m × 6 m inside the building.

(a) 223 m.²

(b) 222 m.²

(c) 221 m.²

(d) 220 m.²

SOLUTIONS

S1. Ans.(c)

Sol. Crop rotation is the method of growing of crops one after another to improve the fertility of land and returning minerals to the soil.

S2. Ans.(c)

Sol. ▭(S+a_c=1)

S → degree of saturation

a_c → air content

S3. Ans.(c)

Sol. The process of applying cement mortar under pressure through a nozzle is called Guniting . The machine which is used for guniting is called cement gun. It apply a pressure of 2.5 kg/cm² – 3.5 kg/cm² through nozzle.

S4. Ans.(a)

Sol. The allowable stress in a long column can be increased by increasing its radius of gyration and radius of gyration depends on moment of inertia.

R=√(I/A)

R- radius of gyration

I- Moment of Inertia

S5. Ans.(c)

Sol. Sluice value or gate value are provided at the corner of roads which control and regulate the flow of water at the cross-section of the distribution system.

S6. Ans.(d)

Sol. ▭(K_p=1/3)

K_a= ?

K_a.K_p=1

K_a×1/3=1

▭(K_a=3)

S7. Ans.(d)

Sol. Given, stream function Ψ = (x²-y²)

Magnitude of absolute velocity at point (1, 1) = ?

Now,

V_x=∂Ψ/∂y

V_x= -2y

▭(〖V_x〗_((1,1) )= -2)

V_y=(-∂Ψ)/∂x

V_y= -2x

▭(〖V_y〗_1,1= -2)

V=√((V_x )^2+(V_y )^2 )

=√((-2)^2+(-2)^2 )

=√8

▭(V=2√2)

S8. Ans.(a)

Sol. Batching→ It is the process of proper and accurate measurement of concrete ingredients. It is either done by mass or volume batching.

S9. Ans.(c)

Sol. As per IRC 66 : 1976–

The intermediate sight distance = 2 × SSD

SSD = Stopping sight distance

S10. Ans.(d)

Sol.

Given, built up area = 250 m²

Courtyard area = 5m × 6m = 30 m²

Note → plinth area does not include the courtyard area.

Hence, plinth area = built up area – courtyard area

= (250 – 30) m²

= 220 m²